Uscg Solid Waste Incinerator / Marine Incinerator

Model NO.: Marine Waste Incinerator

Processing Methods: Combustion

Incinerator Pullution Sources: Solid Waste Processing

Certification: CCS/Lr/ABS/Uscg Marine Incinerator

Application: Marine/ Hospital/Industry/ Farm

Trademark: GR Marine Incinerator

Transport Package: Plywood Case Uscg Marine Incinerator

Specification: CCS/USCG/LR/ABS Incinerator

Origin: China Waste Incinerator

HS Code: 84178050
Uscg Solid Waste Incinerator / Marine Incinerator

Description
The Incinertor,which is designed for on board incineration of ship's waste oil and solid, it mainly consists of four parts:
A. Combustion chamber with diesel oil burner, sludge burner, and electric control panel.
B. Flue gas fan
C. Flue gas damper.
D. Sludge tank with circulating pump and heater.

Details

The incinerator GRINC-18 is equipped with single door in front, which are intended for loading
Of solid waste and ash removing, the incinerator in stand-by mode(COM. Tem. Less than 220Â° C), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till COM. Tem. Less than 100Â° C and incinerator fully stop.

The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and
Operator panel. The electric panel is built according to international standards for marine equipment.

The operator panel which is located at the right side of the control panel has a touch screen and
Defined keys for system starting/stopping and selecting burner modes. The burning process is controlled by the PLC and monitored by the HMI(human machine interface)and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.

Type GR INC-18 Â

Capacity 180,000Â kcal/h (Â 208KW)
22.5Â kg/h IMO sludge oil
14,4000Kcal/h solid waste IMO sludge (20% water content) IMO class 02 solid waste

Combustion chamber temperature Max.Â Â Â Â Â Â Â Â Â Â 1180Â 8C WorkingÂ Â Â Â Â Â Â 850-1150Â 8Â C Â

Flue gas temperature Max.Â Â Â Â Â Â Â Â Â Â Â 375Â 8C WorkingÂ Â Â Â Â Â Â Â 250-340Â 8Â C Â

Surface temperature Less than ambient temperature +20Â 8Â C , and less than 60Â°C Â

Electrical power Consumption 7kW Â

Negative pressure 5-35 mm WC Negative pressure in combustion chamber

Total weight 1500 kg Â

Outline dimension Â See dimension drawing (APPENDIX)

Other capacity 30kg~500kg/h is available.

Please contact us to confirm the detailed incinerator required. Or Other water treatment equipment. Thanks
E-Bike Mid Motor
The central Ebike Motor of Electric Bicycle is a commonly used component on Electric Bikes. Three types of motors used on power assisted bicycles; Front wheel hub motor, center mounted motor, rear wheel hub motor. The mid mounted motor is a rising star among these three types of motors. After undergoing lengthy technological progress and updates, it has only been developed and used on Electric Bicycles in recent years. Installed in the middle pedal position of the bicycle. It is precisely because of the characteristics and installation location of the central motor that we usually apply it to Lithium Battery mountain assisted bicycles. Because off-road cycling enthusiasts may not always have flat mountain roads, and may even be very bumpy. Riding is quite laborious, so there is an urgent need for external force to provide instantaneous main thrust. Neither the rear wheel hub motor nor the front wheel hub can play this effective role, so the central motor is called the best choice for Assisted Electric Mountain Bicycles.
Electric Walking Bike,Ebike Mid Motor,Electric Bike For Adults
Ejoysport Technology (SuZhou)Co.,LTD , https://www.ejoysportbike.com