It is a kind of conductive device.
It includes: Combined cathode conductive device (T3Y 20×120) solid copper bar and stainless steel casting assembly, Copper conductive seat (copper, nickel), Cathode water-cooled high-current conductive seat (chrome). Electrolysis and deplating anode conductive copper bar (Cu 80*8), Copper and nickel liquid anode conductive copper bar (Ti&Cu 80*8), 3+chromium anode conductive copper bar (Ti&Cu 100*10), Roughened anode conductive copper bar (Cu 60*10), Non-conductive support (nylon), Anode base(PP/PVC), Anode conductive bar protection support rod (PP/PVC), Accessories such as insulation pad cover and stainless steel standard parts.
"Direct Current" (DC), also known as "constant current", constant current is a type of direct current, which is direct current with the same size and direction.Constant current means that the size (voltage level) and direction (positive and negative) do not change with time (within the relative range), such as dry batteries.
Dc Conduction System,Conductive Seat At Tank Side,Copper Bar Tank Side,Conductive Device At Tank Side Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com
The methods of impregnation are:
1. The impregnation is brought into a molten state and vacuum impregnated.
2. A hardening liquid is used as a carrier, and the impregnation is placed therein for impregnation.
3. Using a volatile liquid as a carrier, the impregnation is dispersed therein for impregnation, and then the liquid is volatilized.
4. The impregnation is vaporized and then impregnated.
The impregnate not only acts as a lubricant, but also increases the strength of the matrix material.
Impregnated composite bearing
The porous material is impregnated with a porous material to form a solid-lubricated impregnated composite bearing, and the solid lubricant stored inside the bearing bush continuously supplies a solid lubricant to the friction surface as the bearing pad wears. A typical composite bearing is made of carbon graphite as a matrix material, impregnated with soft metal, polytetrafluoroethylene or inorganic material (BaF2).