Large Tray Making Machine,Injection Molding Machine Of Pipes,Ppr Gas Pipe Fittings,Fittings For Ppr Pipe Ningbo Outai Plastic Machinery Technology Co.,Ltd , https://www.outacmachine.com
Traps classification
According to the different working principle of traps, traps can be divided into the following types: First, the mechanical type: relying on the steam trap condensate level changes in the water level movements, including: Float: Float closed hollow sphere Open up Float type: the float is open up to the barrel-type Open downward Float: the float is open down to the barrel Second, the thermostatic type: Rely on the liquid temperature changes and actions, including: bimetallic: sensitive The original is a bimetallic vapor pressure type: sensitive to the original bellows or ink cartridges, filled with volatile liquid inside Third, the thermal power type: relying on the thermodynamic properties of the liquid changes. Disc type: Because of the same pressure, the flow rate of liquid and gas are different, resulting in different dynamic and static pressure to drive the disk valve action Pulse: As the temperature of the condensate through the two series of serial orifice Plate, sitting in the bipolar orifice between the different pressures, driving the valve action. Over bipolar orifice plate type, sitting in the bipolar orifice between the different pressures, driving the valve action. This article Keywords: Traps