On May 14, Sichuan FAW Toyota Motor Co., Ltd. Changchun Fengyue Company's new factory was completed and the Corolla downline ceremony was held in Changchun. The completion of the new plant of Changchun Fengyue Company and the downline of Corolla are another important achievement of the cooperation between FAW Group and Toyota Corporation of Japan, which promoted the development of the automobile industry in Jilin Province and the optimization and upgrading of its structure, and marched towards the goal of 4 million vehicles. It is understood that the new plant of Changchun Fengyue Company is the key construction base of the “Twelfth Five-Year Plan†in Jilin Province and Changchun City, with a total investment of 4 billion yuan. It produces a series of Toyota classic models such as Corolla, with a planned production capacity of 200,000 units. 100,000 vehicles.
Installation steps for SANY hydraulic cylinder seals
For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany Safe Seal Technology Co., Ltd. , https://www.jolseals.com
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.