Teach you clever use of slurry pump

It is well known that the working environment of the slurry pump is very bad. Therefore, this also determines the service life of the slurry pump. Here's how to use coups to extend its life.

To solve this problem, it is necessary to cut the debris and long fibers that are inhaled by the slurry pump, then discharge the dirt and water. This will not only prolong the service life of the slurry pump, but also accelerate the construction of the municipal engineering. Speed ​​creates the conditions. There is also a stir-type electric pump, which functions slightly differently from cutting. It is equipped with a stirrer attachment. When the water is pumped to the bottom layer, due to the proportion and uneven concentration of sediment or sediment in the underwater, it is sucked in by the thick sediment until the water is not drained. This is the first step. It is necessary to stir them evenly and dilute them to thin sand so that it is not easy to damage the electric pump.

In addition, in order to maintain the balance of the axial force of the main impeller, an auxiliary impeller structure must be provided, which can reduce the pressure in the sealing chamber, so that the axial force of the electric pump and the life of the mechanical seal are greatly improved. The problem of heat dissipation for electric pumps has always been a key issue in the service life of electric pumps. If the cooling effect is not good, the temperature in the motor will increase, causing the power of the motor to increase continuously, which will easily burn out the motor and shorten the service life of the pump.

In order to solve this problem, we use an external circulation cooling system to enhance the cooling function. It can ensure that when the electric pump is exposed to the water, it can still work normally. For the discharge of corrosive liquids, the stainless steel electric pump can be used first, and its corrosion resistance and use reliability will be greatly improved.