Introduction of wet laser particle size analyzer

According to the test concept of "dry sample dry test, wet sample wet test", if the material being measured is a slurry, suspension or emulsion, etc., Newpactech offers the following different types of wet laser particle size analyzers to test: The particle size distribution in the raw state of the material:

Wet laser particle size analyzer technical indicators:

Test range 0.1-875 μm Data processing Fraunhofer or Mie theoretical measurement time approx. 20 seconds (start measurement to display analysis results)

Shading ratio up to 50%

Sample circulatory system with built-in ultrasound: 60W, adjustable power and time Auxiliary adjustable speed mechanical agitation Dispersion Peristaltic pump: rate can be adjusted steplessly Circulating tube: silicone rubber or fluororubber optional sample injector SVA (100 ml )

Corrosion-resistant pipe Dispersion tank volume: 400 ml Material: The overall stainless steel operation software control standard operating procedure (SOP)

Features and features:

1. The sample dispersion tank is equipped with a high and low level controller to achieve automatic feeding, testing and discharging; automatic monitoring of the dispersion medium capacity;

2. Built-in 60W ultrasonic dispersion, energy and action time adjustable, with adjustable rate double mechanical stirring diffuser, to achieve the best dispersion effect;

3. The stable peristaltic pump cycle, according to the different materials tested, the pump speed can be adjusted steplessly;

4. Automatic system self-cleaning function to avoid cross-contamination between different samples;

5. Fast measurement, no special sample preparation, especially suitable for testing of various materials such as factories and mines, research institutes, analysis and testing centers, colleges and universities;

6 powerful and highly intelligent operation software, a variety of test reports can be arbitrarily selected, the test report and data can be compared under a unified interface, or a unique test report format can be designed on its own; it also contains FDACFR21Part11Model data comparison;

7. The main body and housing of the instrument are made of high-quality stainless steel and are durable.