“In the course of our daily repairs, the wading trucks in the water are often subject to breakdowns and there is a relatively small number of leaks in the car.†Dongfeng Service Station introduced, especially after the summer rainy days, especially the probability of water leakage from old sprinklers. maximum. Some of them are blocked drainage pipes under the front glass, sunroof leaks, aging of door and window weatherstrips, and leaking water in the trunk. These are the four most common conditions for leaking inside the vehicle. Among them, the blockage of the drainage pipes under the front glass is the most common. "Sprinklers often do not wash, often parked under the trees, dust, leaves, dirt and other small dregs will be easily washed into the drainage pipe, over time will not clean up, it will block the pipe, causing drainage is not smooth, the rain will naturally backflow Into the car, a leak has formed." “In some cases, it is mostly due to the fact that the sealing strips on the sprinkler doors and windows are not tightly formed. After testing at the repair shop, the cause can be determined and repairs can be performed.†He said that the sports mode indicator light kept flashing and the accelerator was stepping on the accelerator. , It is very likely that the line was caused by rain, which caused a short circuit, but only once or twice, indicating that after the rain dried, it returned to normal. "In addition to often parking the sprinkler under trees and not cleaning it in time, some sprinklers are changing their original appearance after being refitted or repaired. Some areas are not sealed and are not waterproof, such as repairing the doors or The windows and seals were not restored and the sprinkler was repaired but there was no restoration of the parts near the front stop drainage pipe, etc.†The driver of the sprinkler should have one more eye and should go to the service station when sending the car for repair. After the repair is completed, check the above locations to see if there is a leak. In addition, check the sprinkler regularly and clean it in time. If you find that the car leaks, what should you do? First, clean up the water in the car and dry it with a dry towel or a water filter. Secondly, check which parts and components in the sprinkler are damaged and severely damaged. Repairs must be made at the repair shop in time. Then, check the cause of the leak and follow the four most common causes of leaks above to conduct a one-on-one test. If you can't detect it yourself, go to the sprinkler repair shop and ask a professional to perform the test.
Maximum Load:300.000t
Gantry Crane
is a variation of bridge crane. It is well suited for use in storage yard or
workshop that does not provide corbels for support. Two forms exist for the
product: semi-Goliath and Goliath. With a maximum load handling capacity of
300t,the crane is commonly found at port, storage yard, and outdoor freight
yard, where it is used to load or unload bulk goods or various others.
In a gantry
crane, the main bridge beam is supported by two supporting legs that run along
the rail at the ground level. The main beam can be extended at both ends by using
the girder overhangs so that the peripheral area of workshop can be served.
The crane is
vital to the material handling process. Crane problems may cause downtime and
downtime costs customer`s money. Eurocrane product has always been supplied
with consistent good quality, which is sure to become one of your preferred
choices in logistics industry. Following is a list of main advantage of our
crane product.
We are a
pioneer in the manufacture of European gantry cranes. Drawing on the valued
experience and advanced techniques, we constantly bring revolutionary
innovation to the crane industry. Each product has been rigorously tested prior
to being launched onto the market. Hence Customers can purchase with confidence.
Our product aims to help customers improve productivity, lower equipment
maintenance cost, extend equipment use life, maximize return on the investment,
and create more value for the customers.
In its compact
body, the crane house many desirable attributes such as even load distribution,
light weight, and minimum stress on the rail. It is designed to decrease
construction cost and create ease of maintenance. Compared with other domestic
cranes, our crane allows for 10% to 15% decrease in its dimension according to
the loads that it handles. The heavier the load is ,the more decrease the crane
allows in its dimension. In this way, customer comprehensive investment is
optimized and rewarded with high rate of return.
The compact
design of our gantry crane leaves more space for industrial operation. All its
components are sturdy and long-lasting, requiring limited maintenance.
Reduction in weight and wheel stress leads to decreased energy consumption. It
also lowers the level of requirements on raw materials during its manufacturing
process.
With leading
manufacturing techniques, state-of-the-art manufacturing facilities, integrated
production and strict control and assurance system, we are sure to design and
produce premium-quality gantry cranes with exceptional performance. The concept
of [easy-to-maintenance" is also incorporated into our design to ensure the
final product possesses competitive edges over others of its contemporaries
while allowing easy repair and operation.
Our gantry
crane can be supplied with various configurations to cover a wide range of
lifting capacities, ranging from 8t to over 500t.Other options such as the turn
over hoist,anti-sway device, automatic positioning device, winch servicing and
monitoring device, or remote diagnostic tool are available as well. We also
provide personalized, professional solutions to customers with our experience
and advances techniques.
Gantry Crane Gantry Crane,Rubber Tyre Gantry Crane,Container Gantry Crane,Gantry Crane Eurocrane (China) Co., Ltd. , http://www.craneparts.pl