Since the height of the filling is close to the tower top, the water eliminator does not occupy much space, and the overall height of the cross-flow tower is small, which makes it relatively compact compared with counter flow type, and therefore lower air inlet speed and power consumption as well.
The cross-flow tower adopts a water distribution system that will let the water drop fall naturally by gravity. Thereby, water distribution holes are not easy to be blocked, as water distribution is even and maximizes the performance of the tower fillings. The inspection manhole also enables routinely maintenance without machine shutdown.
A lower part of the cross-flow tower filling is submerged in the water, so that the water flows through the surface of the filling and directly falls into the below tank, making low noise.
The cross-flow tower fan is located in the middle of the Cooling Tower, while the filling, on both sides of the tower. So the amount of splashing water is very small.
Cross Flow Cooling Tower,Cooling Tower Cools Water,Induced Draught Cooling Tower,Induced Draft Cross Flow Cooling Tower Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com
Advantages
1. High accuracy, Durable and Compact;
2. Two cumulants(1 resetting, 1 accumulating);
3. Gallon or Liter Option;
4. PPC body; Also for chemical industry, medicine and other corrosive medium measurement.
 Model:
 K24
 Inlet and Outlet
 NPT1"  BSP1"
 Body  material
 PPS
 Flow Range
 5-50GPM(18.9-190LPM)
 Accuracy:
 ± 0.5%
Â
 Repeatability:
  ± 0.1%
Â
 Pressure Class:
 10Bar
