Oil Pump AC Fan Heat Exchanger Product Parameters
The noise value is the value at a distance of 1 m.
Oil Pump Ac Fan Heat Exchanger,Hydraulic Oil Cooler With Fan,Transmission Fluid Oil Cooler,Oil Water Heat Exchanger Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermictransfer.nl
After the motor arrived at the factory, the city's motor technician immediately disassembled the motor and inspected it. At the same time, the technician was assigned to the user's unit to view it. The test data showed that the DC resistance, insulation resistance, and rotor winding voltage drop were all within the normal range.
In line with the purpose of being responsible to the customer, Shiyi Motor held a special meeting. Based on the inspection results, relevant information provided by the user and past related repair experience, it was preliminarily judged that the rotor winding may have over-current and trip due to soldering or desoldering. With the consent of the customer, the rotor of the motor was further dismantled and found to be de-welded at various locations. By agreeing with the customer, the solution for the rotor to replace the windings was determined.
The customer expressed his appreciation for the serious and responsible attitude of the city's motor, accurate judgment and superb motor repair technology.
Oil Pump AC Fan Bar Plate(plate-fin) Heat Exchanger Series
Features:
Aluminum bar plate fin structure, specially designed motor, so that the pump, motor and fan leaves are integrated, suitable for space restrictions are particularly limited occasions. And can form a safe, independent cycle cooling circuit.
Application areas:
suitable for hydraulic system independent cooling circuit, lubrication system and gear box cooling.
Technical Parameters:
Table is for AC220V, 380V / 50Hz, 60Hz as an example.
Oil pump inlet and outlet ports for the one-way, the standard configuration for the suction type.
Maximum pressure of pump: 70bar Drainage maximum pressure: 2bar
A motor of Zhonghai Industrial City completed 8400KW synchronous motor rotor overhaul
Recently, Zhonghai Industrial City No.1 Motor Co., Ltd. undertook a large-scale repair project of 8400-4/1500 8400KW 10KV synchronous motor. The motor is the main equipment for a steel mill in Shandong Province. It trips several times during operation, and the trip time interval is shortened. The customer can't find the reason.