Stainless Steel Knitted Wire Mesh Stainless Steel Knitted Wire Mesh,Ss Knitted Wire Mesh,Stainless Steel Knitted Mesh,Knitted Wire Mesh SHENZHOU SHUANGYOU MESH CO.,LTD. , https://www.firstwiremesh.com
According to the company, the FZ25 is ideal for dry cutting of large workpieces, especially for lightweight composites, including carbon fiber and fiberglass reinforced plastics, epoxy resins, polyurethanes, and polystyrene. By incorporating a number of special designs into the development of FZ25, it has advantages in the processing of very large workpieces. For the machining of very large workpieces, the FZ25 can travel up to 5000mm in the Y-axis direction; the Z-axis stroke can reach 2000mm; the X-axis uses gears. / Rack drive, its stroke is up to 40,000mm, and can even extend to longer.
At the same time, the FZ25 machine also has structural advantages in applications where more optimized positioning accuracy and surface quality are required. The continuous side wall with welded steel structure has high intrinsic rigidity, and the side wall is filled with special fibers. Reinforced concrete Demtec to absorb vibration and enhance thermal stability. The rugged design and very light moving mass (lightweight gantry, Z ram and milling head) give the FZ25 excellent dynamic performance. Even with the fastest machining of the largest workpieces, excellent surface finish is achieved with little or no manual grinding.
In terms of aircraft manufacturing, the FZ25 can be used to machine large panels and other large parts and parts with great dimensions. In the shipbuilding industry, large parts are often involved, and the FZ25 can handle large-scale machining tasks in the direction of the three axes. Even in the design studio, the milling machine can be used to make large, even 1:1 models.
The VH1 milling head, which is matched to the FZ25 machine, was developed for the machining of lightweight materials. It allows for a large working range layout in all axial directions and is the smallest milling head in the Zimmermann product range. Due to its high dynamic performance, it can achieve high milling rate during HSC processing. On the other hand, its light structure makes the gantry of the milling machine less affected by distortion and bending force, ensuring high-quality surface finishing. .
Zimmermann introduces FZ25 gantry milling machine
Zimmermann has recently introduced the FZ25 gantry milling machine, which has once again expanded the range of applications for its specialized five-axis linkage HSC milling machine. The milling machine is particularly suitable for machining large, curved parts such as rotating dies for the manufacture of tanks, tanks and the like.