Introduction: Compared with ordinary machine tools, CNC machine tools are automatic machines that process parts automatically according to the program. What is a CNC lathe?
Our main products are as below:
1. Oilseed Pre-treatment Machinery;
2. Oil Press/ Oil Expeller/ Oil Pressing Machinery / Edible Oil Processing Equipment;
3. Oilseed Pressing Line
4. Oil Solvent Extraction Machinery/ Food Oil Leaching Equipment;
5. Cooking Oil Refining Machinery/Edible Oil Refinery Equipment, and other Cooking Oil Processing Equipment.
6. Oil Tank
7. Silo
8. We can contract for the Cooking Oil Production Line / Edible Oil Plant Turnkey Project from 2 ton to 1000 ton per day.
9. Wheat Flour Production Line in different capacity.
Wheat Flour Production Line,Wheat Flour Mill Machine,Wheat Flour Mill Production Line,Wheat Flour Mill Process Line Hebei Huipin Machinery Co.,LTD , https://www.oilpresschina.com
CNC lathe is a high-precision, high-efficiency automatic machine tool that can process complex workpieces such as linear cylinders, sloping cylinders, and arcs. It also has functions such as linear interpolation and arc interpolation, and it can be used in mass production of complex parts. A good economic effect.
Compared with ordinary machine tools, CNC machine tools are automatic machines that process parts automatically according to the program. After the programmer has programmed the program, the program is input into the numerical control device to direct the machine tool. The purpose of machining different parts can be achieved by simply changing the program that controls the movement of the machine.
However, the normal use of CNC lathes must meet the following conditions:
one. Place the environment
CNC lathes need to be placed in a dry, dark place and away from sources of vibration. Otherwise it will affect the stability and reliability of the machine.
two. voltage
The power supply voltage required by CNC lathes must be strictly controlled. The voltage fluctuation must be within the specified range and ensure its stability. Otherwise, the CNC system will not work properly.
three. temperature
The ambient temperature needs to be less than 30 degrees and the relative temperature is less than 80%. Excessive temperatures will reduce the life of the control system components and lead to increased failures.
In addition, it is also important to note that: The parameters set by the manufacturer in the CNC lathe control system must not be arbitrarily changed. The parameters set by the manufacturer are directly related to the dynamic characteristics of the machine components. In addition, lathe attachments must not be replaced at will. The free replacement of attachments will result in mismatching of various parameters, and may even cause unexpected accidents.
Finally, there is a point to note: Please ensure that the pressure of the hydraulic chuck, hydraulic knife holder, hydraulic tailstock, hydraulic cylinder are within the allowable stress range.