Learning a driver's license is one of the essential books of the contemporary people. Talking about the period of study in the driving school, I believe people with common experiences are all very impressed. The second subject is the only path that every student must take. As a newcomer, just starting to learn a car will surely encounter a variety of The problem is that the Ren Xiaobian is preparing for the second subject in the near future and has compiled relevant experiences for everyone, hoping to help everyone. Everyone car tips, subject two must master three basic skills: 1. Clutch use The coach said that the subject two exam is actually an examination of the clutch control. The speed must be slow, and the clutch can be controlled well. In addition, it is to find points. The clutch control mainly finds two points: The first is the slow walking at ordinary times. The second point is the semi-linkage point at the start of the uphill. (1) The first point: the clutch stepped on to the end, stepping on the brakes, and then slowly lifting the clutch. As soon as the engine sound started to change, it became a bit boring and it was the first point. (2) The second point: It is the half-hill starting point and half-linking point. There are two ways to remind everyone, the first is jitter, which means the steering wheel and gear lever start to shake. Clutch pedal will also have a little shake. The second is to look at the tachometer. Jetta generally slips to 600-700 rpm. The second method is relatively good to master, but both methods must be mastered. Otherwise, the tachometer of the test car is bad. 2 according to the reference point of view Look at the basics: Adjust the seat, backrest and mirrors. (1) Adjust the seat: Handle the adjustment lever, move the steering wheel forward and backward with one hand, and the feet can step on the pedal in the end will not be too reluctant. (2) Adjusting the backrest: The standard of the backrest angle is that after the arm is straightened, the wrist can just reach the top of the steering wheel. (3) Adjusting the rear-view mirror: Different models have different methods. In general, the left rearview mirror can see the left rear wheel and the entire body of 1/4, and the right rearview mirror should see the entire body of 1/4 and two door handles. Everyone's car tips, the second exam is very particular about the location of the line, so the examination car mirror and seat angle, height must be adjusted to the same as the coach, as well as sitting posture must also be consistent. 3. Hit the steering wheel The method of playing the steering wheel will be for all trainees. The difference is the difference in proficiency. The reminder of the car for each person needs more practice until the hands can skillfully play the steering wheel. The two focuses of the steering wheel in subject two: Down the library: look at the rearview mirror, if the body is not the best way is to constantly look at both sides of the rear-view mirror, the body away from the control line there is a large distance, where the direction of play. Everyone car tips, but also pay attention to the process of fine-tuning, the angle is not too large, the most suitable half a circle, and finally pay attention to the body is going back. Curve driving: Curve driving If you do not want to press the line, the timing of the steering wheel is very important, so it is very important to find the relevant point. In this process, pay attention to fine-tuning the direction to adapt to the change of the curve. Everyone car tips, from time to time scanning the left and right rearview mirror, observe whether the wheels are pressed, hope the trainees pay attention to the curve running speed is slow, even if the points are over, can also adjust. Everyone car tips, practice interval time is not too long, through more practice to accumulate to better master the car feeling. It takes a long time to train a car, which is useless for building a car. The coaching method is also easy to forget. Everyone's car prompts that, after practicing the car, it is necessary to train with 5 projects and do it according to the requirements of the exam. After getting acquainted with this tension, the exam is not afraid of nervousness.
ZXZ
Automotive bearings have good quality and long life, they are performance
design projects summary.
Different kinds of auto bearings are
customized to meet the various working conditions, and all of them need good
quality and long life:
1. Alternator bearing:inner ring rotation with high sealing
performance, can bear high speed rotation.high & low temperature environment.low starting torque and long life.
2. Tensioner pulley bearing:outer ring rotation with low load, but
high requirement for temperature rising, grease leakage, anti-dust and
anti-water in different conditions.
3. Electromagnetic clutch bearing:mostly are double row angular ball
bearings, low radial load, rotation speed ≤6000rpm, according to the working principle of electromagnetic
clutch, as the bearing need to bear axial force intermittent and surrounding
with water and dust, so high requirement for grease leakage, anti-dust and
water proof.
ZXZ design different types of auto bearings
to meet the specific need of applications, and provide excellent solution to
ensure that our clients derive maximum benefits from our products.
Automotive Bearings,Wheel Bearing,slewing bearing,Hub Bearing ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com