(b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP. (b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP. The scientific name of the PVC material of the inflatable product is polyvinyl chloride, abbreviated as PVC. The inflatable castle is a large inflatable toy for children. The materials generally used in children's Inflatable Toys are high-polymer fiber double-layer weaving and PVC coating. This is a high-strength air-tight cloth or PVC air-tight cloth with a mesh. The thickness of the cloth is generally: 0.45-0.8 mm.
5. High temperature and low temperature resistance, can be used at minus 28 degrees and high temperature above 30 degrees.
Pvc Material,Pvc Film,Pvc Film Roll, Rigid Pvc P&D Plastic Manufacture Co., Ltd , https://www.leadingproduction.com
Techincal data of KM-85A-32:Â
Â
Crimp range
4mm-35mm
For hydraulic hose
1 1/4inchÂ
Side openingÂ
52mm
OpeningÂ
15mm
Force
2650KN
Cycle time
5s
Voltage & Power
380V-50HZ-3PH
Optional voltage
220V,440V
Pump
Piston pump  36min/L
Dies sets
4sets
System pressure
20Mpa
Machine size
840*820*1340mm
Weight without oil
930KG
Shelf+quick change
Optional
Electric  limit switch
has
Electric  control with touch screen
Optional
Crimped samples by side feeding hose crimping machine KM-85A-32:
Hose crimping machine why not choose kangmai ?Â
1. kangmai hose crimping machine CE& ISO PATENT Approved and SGS Audited.
2. The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason like below:
(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.
(c) The technical of machine head is forging or casting. Casting is cheap but has small hole on machine head. The piston will divide from casting machine head.
3. Strictly testing and inspetion.Â
(A) for  raw material, we will check again by our inspector as per international standard. Only the raw material reach to international standard and allow enter kangmai facotry.Â
(B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry.Â
(C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse.Â
(D) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry. 
 
5. KANGMAI HYDRAULIC PAYTATION SERVICE AND TECHINCAL SUPPORT:Â
(A) tell you, my dear  clients- the route of vessal.Â
(B) take the photo of machine production condition and package condition to you-my clients.
(C) Apply free container yard of your port, my dear client give you engouh time to clear your country customer.Â
(D) when you get our hose crimping machine, I will tell you again how to operation the machine and how to maintaince the hose crimping machine.
(E) pay a return visit after you use our machine 2-3 hours. Offer some suggestion again about maintaince machine so that you can use kangmai machine for a long time.
(F) technical support: (1)24 hour technical support available
(2)We can ask our engineer to  your mentioned address ifÂ
there is any need.
Side Feeding hydraulic hose crimping machine KM-85A-32 is Suitable for u-shaped, l-shaped, and j-shaped fittings and car aircondition hose.
Techincal data of KM-85A-32:Â
Â
Crimp range
4mm-35mm
For hydraulic hose
1 1/4inchÂ
Side openingÂ
52mm
OpeningÂ
15mm
Force
2650KN
Cycle time
5s
Voltage & Power
380V-50HZ-3PH
Optional voltage
220V,440V
Pump
Piston pump  36min/L
Dies sets
4sets
System pressure
20Mpa
Machine size
840*820*1340mm
Weight without oil
930KG
Shelf+quick change
Optional
Electric  limit switch
has
Electric  control with touch screen
Optional
Crimped samples by side feeding hose crimping machine KM-85A-32:
Hose crimping machine why not choose kangmai ?Â
1. kangmai hose crimping machine CE& ISO PATENT Approved and SGS Audited.
2. The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason like below:
(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.
(c) The technical of machine head is forging or casting. Casting is cheap but has small hole on machine head. The piston will divide from casting machine head.
3. Strictly testing and inspetion.Â
(A) for  raw material, we will check again by our inspector as per international standard. Only the raw material reach to international standard and allow enter kangmai facotry.Â
(B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry.Â
(C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse.Â
(D) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry.Â
Â
5. KANGMAI HYDRAULIC PAYTATION SERVICE AND TECHINCAL SUPPORT:Â
(A) tell you, my dear  clients- the route of vessal.Â
(B) take the photo of machine production condition and package condition to you-my clients.
(C) Apply free container yard of your port, my dear client give you engouh time to clear your country customer.Â
(D) when you get our hose crimping machine, I will tell you again how to operation the machine and how to maintaince the hose crimping machine.
(E) pay a return visit after you use our machine 2-3 hours. Offer some suggestion again about maintaince machine so that you can use kangmai machine for a long time.
(F) technical support: (1)24 hour technical support available
(2)We can ask our engineer to  your mentioned address ifÂ
there is any need.
The characteristics of this material are:
1. It has strong tensile force and strong tear resistance.
2. Strong anti-fouling ability, the surface can be kept clean for a long time and easy to clean.
3. Strong anti-fracture ability, the surface is not easy to open glue.
4, and strong anti-corrosion, not easy to oxidize.
Side Feeding Hose Swaging/Crimping Machine for Car Aircondition Hose
Model NO.: KM-85A-32
Name: Crimping Machine
Type: Computer Type
Weight: 930kg
Accessory: Dies 4 Sets
Color: Blue
Crimp Range: 4mm-35mm
H.S.: 846291900
Application: Crimp Hydraulic Hose, Fitting & Ferrule
Trademark: KANGMAI
Transport Package: Wooden Case
Specification: CE
Origin: China Handan
HS Code: 846291900
Model NO.: KM-85A-32
Name: Crimping Machine
Type: Computer Type
Weight: 930kg
Accessory: Dies 4 Sets
Color: Blue
Crimp Range: 4mm-35mm
H.S.: 846291900
Application: Crimp Hydraulic Hose, Fitting & Ferrule
Trademark: KANGMAI
Transport Package: Wooden Case
Specification: CE
Origin: China Handan
HS Code: 846291900
Side Feeding hydraulic hose crimping machine KM-85A-32 is Suitable for u-shaped, l-shaped, and j-shaped fittings and car aircondition hose.