First, the principle of high pressure cleaning car?
Bin Liners, Small Trash Bags, Kitchen Trash Bags, Clear Garbage Bags, Black Trash Bag, Refused Sack BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmtshirtbag.com
The principle of a high-pressure cleaning vehicle is to turn a steel wire that can be bent elastically into a blocked sewer pipe by rotating it, and to remove the plug cloth, hair and the like. There is also a tool called a shot pass, which is a pressure relief tool that uses a high pressure principle to open the blocked sewer. This is the principle that is commonly used in life to open up blocked pipes. The pipelines used by industrial pipelines are relatively different from the ones used for the size of pipelines. The pipelines with 100 mm channels are as dredging as household sewers.
Second, what are the uses of high-pressure cleaning vehicles?
High-pressure cleaning vehicles are also known as: pipeline dredging vehicles, road cleaning vehicles, fence cleaning vehicles, and sewer cleaning vehicles. Cleaning vehicles are mainly used for cleaning roads, square pavements, sewers, pipelines, sediment, dead mud, and can also be used to clean industrial drainage pipelines, walls, etc. High-pressure cleaning vehicles can be equipped with sprinkler and sewage suction devices, which integrate cleaning and suction.
Third, high pressure cleaning car can be used in winter?
Can be used, but must pay attention to temperature changes. It can be used when the temperature is above zero in the early winter and it cannot be used when the temperature reaches below zero in the deep winter. Use of high-pressure cleaning trucks in winter high-pressure water pump should pay special attention to temperature changes, when the temperature reaches zero degrees Celsius, the water in the water pump after the ice expansion will cause the water pump seal, water valve crack. If forced to start, the plunger and housing of the high pressure water pump will be severely damaged, so it is not allowed to start the high pressure water pump at zero degrees Celsius and below.
Fourth, how to maintain the high-pressure cleaning car battery?
1, you can use other vehicles to start the battery. However, this method must be taken care not that professionals do not arbitrarily tamper with the battery positive and negative, so as not to burn the battery or electric injury. The correct method is to first confirm the positive and negative electrodes of the two batteries, the positive electrode is connected to the positive electrode, and the negative electrode is connected to the negative electrode.
2, You can use the method of pushing or downhill to slide the medium-strong gear to start the suction truck. The specific operation method is to first put the car to the neutral gear and then hang a file and step on the accelerator. After the high-pressure cleaning car starts, it quickly steps on the clutch to reduce the throttle. Of course, this method is suitable for some old drivers.
Fifth, the general high pressure cleaning car pressure?
Between 15bar and 20bar, high pressure will damage the paint.
6. How often does the high pressure cleaning vehicle clean up on the market?
Summarized as follows: 5 cubic meters of tank, a car 200-800 yuan, 5 cubic meters of sewage pool or pipe network, the need for a minimum of 3 cars, because of repeated flushing with water. In general, clean up the lowest 1200 yuan, the highest can shout 3500 yuan.
7. Can the high-pressure cleaning truck clean the DN1200 sewage pipeline?
Yes, the high-pressure cleaning vehicle can be equipped with a suction function and can clean various sewers. It is mainly designed for municipal pipelines. There are many options for high-pressure cleaning vehicles.
8. What are the precautions for adding water to a high-pressure cleaner truck?
When the high-pressure cleaning vehicle (pipe dredging vehicle) uses a river ditch or a pond as a water source, pay attention that all the ends of the suction pipe are not submerged in water. In order to avoid inhaling stones or more sand and drift debris, the suction pipe end is generally provided with a filtering device, and it is forbidden to remove the filtering device during the water absorption. If the water source is shallow, it is necessary to dig up the water absorption area in advance so as to ensure that it does not contain impurities and air.
9. Which brand of high-pressure cleaning vehicle is better?
Dongfeng and Foton are widely used.
Ten, high pressure pump high pressure pump pressure is generally how much?
The smallest 8 MPa, the largest 36 MPa. Our common high-pressure plunger pumps are the following: 8 MPa, 10 MPa, 16 MPa, 18 MPa, 20 MPa, 22 MPa, 28 MPa, 30 MPa, 36 MPa. The megapascal refers to a pressure of about 10 x kilograms per cubic centimeter when the high pressure purge tube is being output. That is 16 MPa equals 160 kg of pressure.
Suitable for kitchen, office, courtyard, lawn and also the dustbin.
The garbage bag has large capacity, reliable quality, can carry a large amount of garbage, environmental protection and durability.
The bags could be packed individually for one piece or 10 piece , or just as the quantity you need.To Compare with garbage bags on roll, Garbage bags on sheet could save more space, and you do not need to tear off the bags before usage.
