Compared with other mechanical processing, mold processing has its own particularity. At present, China's machine tool industry, China's domestic production of mold equipment, in addition to some of the domestic high-end equipment lack of independent innovation capabilities, but also difficult to meet temporarily, most of the domestic technology and ability to meet. The main reason is that the machine tool industry did not attach importance to this market in the mold industry and did not seriously analyze and study some special requirements for mold processing.

Luo Baihui, secretary-general of the International Model Association, pointed out that compared with imported equipment, the mold equipment industry's market is less competitive in terms of performance, reliability, accuracy, quality, delivery time, and comprehensive service capabilities. The main reason is that the capacity for independent innovation is weak, and the equipment market in the mold industry is not valued, and the system, mechanism, and management cannot be kept up to date.

In the current mold and die equipment industry market, medium and high-end products have basically been occupied by Japan, Europe and the United States, and middle- and low-grade products are mainly imported from Taiwan. Today, South Korea's mold equipment has begun to show a trend of continuously expanding its market share, and most of China's machine tool companies are still indifferent to this and are still moving outside the office.

According to Luo Baihui, the Secretary-General of the International Modeling Association, the research shows: In view of the fact that China's machine tool industry has not attached great importance to the mold equipment market, the share of domestic equipment in this market is relatively low. The machine tool industry should pay close attention to the development of the mold industry and attach importance to the equipment market in the mold industry. Even when the current task is full, it should focus on long-term development, recognize it from a strategic perspective, and fully study the market. Correct positioning. In particular, the backbone enterprises that produce gold-cutting machine tools should pay more attention to this issue, because the enterprises that produce electric processing equipment are relatively much better at this point. The relevant companies have established some good brands and established in the mold industry. Has a good reputation and image.

After the "Eleventh Five-Year" development, China's mold industry has indeed made great progress. Mainly manifested in: the vigorous development of foreign-funded enterprises, China's mold production scale and product level has a rapid development; non-state-owned economy springing up, so that China's rapid expansion of mold production, product levels are also relatively Raise quickly. In the Pearl River Delta and Yangtze River Delta regions where Hong Kong capital, Taiwanese capital, and foreign capital are particularly concentrated, along with the rise of enterprises in machinery, electronics, light industry, building materials, communications, and office equipment, production of self-produced molds for internal support of enterprises With it a lot of development. This part of the mold production scale is about 300 to 500 billion yuan. The total scale of mold production in China has exceeded 60 billion yuan in 2005. According to Luo Baihui, a mold expert, the development speed of the mold industry during the "11th Five-Year Plan" period is higher than the annual average of more than 15%. The total mold production during the "Eleventh Five-Year" period will be 100 to 20 billion Yuan each year. With the increase, the total size of mold production in the country (excluding the statistics of Hong Kong, Macao and Taiwan) has reached about 100 billion yuan. If the average annual increase is 15 billion yuan, the input-output ratio of fixed assets is roughly 1:1. About 60% of the investment is used to purchase new equipment for calculation. On average, about 9 billion yuan will be spent on purchasing each year. Kinds of equipment. This is an estimate of the equipment market in the mold industry. Although this equipment market accounts for only a small proportion of the total size of the machine tool industry, it cannot be said to be too small and should not be overlooked. Even if the foreign-funded enterprises mainly use foreign equipment to remove this piece, the domestic machine tool industry will still have at least 6 billion yuan in equipment market per year. If the level of domestic equipment and services are competitive, foreign-funded enterprises are also willing to purchase inexpensive domestic equipment. Therefore, if the machine tool industry can grasp this market well, it is not an exaggeration to say that the market of about 30 billion yuan during the “Eleventh Five-Year Plan” period is described as “big”.

Mold industry's basic requirements for equipment

Compared with other mechanical processing, mold processing has its own particularities. These particularities are: 1. Most molds need to process complicated curved surfaces on solid metal modules. With the continuous development of molds, the weight of modules will also increase, and some of them have reached several tens of tons. 2. Most molds are rectangular or rectangular in shape. They are rarely narrow and long. The main processing volume is concentrated on the mold and punch. 3. With more and more precise and complex requirements for mold products, the requirements for precision machining of molds have become higher and higher. Now, the machining accuracy of many molds has reached ±1 to 2 μm, and will soon develop to less than ±1 μm;4. With the shorter and shorter requirements of the user on the mold production cycle, mold processing must meet the requirements of high efficiency, rapidity, and a certain degree of flexibility and full-time non-stop operation at full load. According to the above four particularities, the following basic requirements are put forward for mold processing equipment: 1. The machine tool must have good rigidity and large load capacity that can adapt to the weight of the module. 2. Workbench size to adapt to the size of the mold, suitable for rectangular or square and round, not narrow, but the height direction and its travel requires a larger space; 3. Must have high accuracy and precision retention; 4. To be able to remove the margin quickly and efficiently, and have a high degree of reliability in order to maintain continuous full-load operation; 5. In order to adapt to the complex space surface processing, and there are a large number of processing, it is required that the machine tool can be multi-axis-linked and equipped with a large-input information capacity numerical control system.

In the above, only some of the basic requirements for mold processing on equipment have been proposed, and there are still many special requirements. For example, plastics processing machines require higher speeds. However, due to the small cutting forces, the machine tools can be light-weighted to reduce costs. The research and development presses used in trials do not require high efficiency and speed, but require anti-rotational energy. In order to repair the mold; some simple processes can be used for special machines and so on. At the same time, compound processing, flexible processing, and on-line inspection are also requirements for mold processing.

Analysis of Domestic Mould Equipment Competitiveness

At present, domestic equipment produced by the domestic machine tool industry, except for a small number of high-end equipment domestic lack of independent innovation capabilities, but also difficult to meet temporarily, most of the domestic technology and ability to meet, but because the machine tool industry does not attach importance to this market and the mold industry The lack of careful analysis of some special requirements for mold processing caused the study. Its main performance is: 1. The product has not been developed for the special requirements of the mold industry. The main structure cannot be well adapted to the mold processing, including the size and weight of the table, the rigidity and stability of the machine tool, the reliability of long-term full-load operation, high-speed, high-efficiency, high-precision, and large margins. Spatial surface processing, etc. 2. The quality of many parts and components on the equipment does not matter, especially certain electronic components, certain mechanical parts and numerical control systems, etc. 3. Due to the enterprise system, mechanism and management reasons, including the assembly quality and the overall level of service is not high, especially after-sales service can not keep up, resulting in die companies can not easily choose domestic equipment.

With respect to the equipment market for the mold industry, compared with imported equipment, domestic equipment lacks competitiveness in terms of performance, reliability, accuracy, quality, delivery time, and comprehensive service capabilities. Luo Baihui believes that the main reason is that the capacity for independent innovation is weak. It does not attach importance to the equipment market in the mold industry, and the system, mechanism, and management cannot keep up with the three aspects.

Take CNC machine tools as an example. In 2005, the output of CNC machine tools in China has exceeded 60,000 units. The number and level of products have made considerable progress, but their domestic market share is less than 30%. (According to data, 2004 is 26.9%) In the mold industry, I am afraid that 20% will not come. Why is this? Luo Baihui thinks that there are roughly three reasons: First, there is a strong demand for CNC machine tools in the domestic market, especially for medium and low-end products, which are widely spread and easy to produce. Most machine tool factories are full of tasks, which makes many companies no longer pursue High, refined, sharp, difficult varieties and high-end products; Second, most machine tool companies have weak independent innovation capabilities, and the core technologies and key technologies are less mastered. Even if they are determined to develop medium-to-high-end products, they are more than satisfied. Insufficient power; Third, although the mold industry has a relatively large equipment market, but due to the special nature of mold processing, especially the individual requirements are more prominent, mold companies are mostly small and medium-sized enterprises, ordering digital equipment is difficult to form a larger batch, Therefore, to meet the needs of the mold industry, it is indeed more difficult, and we must make great efforts, but there will be some risks, but also have the level of Caixing. In view of these three reasons, the domestic machine tool manufacturers still do not pay attention to the equipment market of the mold industry, or have no time to attend to it, and have to allow imported equipment to play the leading role.

Currently, in the equipment market of the mold industry, medium and high-end products have basically been occupied by Japan, Europe and the United States, and middle- and low-grade products are mainly imported from Taiwan. Now South Korean equipment has begun to show the trend of continuously expanding its market share, and most domestic machine tool companies are still indifferent to this and are still moving outside the country.

Domestic mold equipment industry development suggestions

In view of the fact that the domestic machine tool industry is still not paying attention to the equipment market in the mold industry, and domestic equipment has a very low share in this market, Luo Baihui pointed out that the machine tool industry should pay close attention to the development of the mold industry and attach importance to the equipment market in the mold industry, even if It is in the current situation that the mission is full and that we should proceed from the long-term development and recognize it from a strategic point of view. We must fully study and correctly position this market.

In the area of ​​gold-cutting equipment, especially in the middle and low-end CNC equipment, domestic companies are equally promising. In recent years, it is only the mold industry in Zhejiang that it purchases more than 2,000 medium and low-end equipment from Taiwan or domestic Taiwan-funded enterprises each year. Some of China's machine tool companies are fully capable of entering this market. Starting from middle and low-end products, and then gradually to the high-end development, this may be a more practical approach. Of course, with the continuous improvement of the overall level of the mold industry, the grade of equipment needed is naturally increasing. For example, some mold companies in Zhejiang have begun to phase out Taiwanese equipment and gradually shift their purchasing vision to Japan, Europe and the United States. However, the prices of equipment in Japan and Europe and the United States are still more expensive. This is also a good opportunity for domestic machine tool companies. It is hoped that the domestic machine tool industry can grasp this good opportunity and insert its wings in the development of China's mold industry during the “11th Five-Year Plan” period, which will really play a positive role in helping its development. For domestic mold processing equipment industry innovation and development capacity is insufficient, the market share is low, Luo Baihui recommended key enterprises, should strive to improve the quality of existing products and improve service as soon as possible, on the other hand should be directed to the mold industry needs to develop some New products, and vigorously promote, to gradually form a good brand and establish a good image. In particular, the backbone enterprises that produce gold-cutting machine tools should pay more attention to this issue, because the enterprises that produce electric processing equipment are relatively much better at this point. The relevant companies have established some good brands and established in the mold industry. Has a good reputation and image.