Ypg Series Pressure Spray Granulating Dryer

The set is an apparantus that can finish drying and granuliating at the same time, The
needed ball granule with certain size and ratio can be got in accordance with requirements of
process by adjusting pressure flow. And size of atomizing hole.
The working processs of the set is as follow :the liquid of raw material is pumped through 
high-pressure pump, the liquid of raw material atomizes to small drops, then it gathers with hot air 
and fall off. Most parts of powder material will be collected through the outlet of discharge at the 
bottom, The wasted air and fine powder will be separated through cyclone, The wastes air will be 
exhausted through draught fan and powder will be collected at the bottom of cyclone, At the outlet it can also equipped with two grades of duster, It ratio of recover will be over 96%-98%.
The tower body, pipes, separator of the set where will contact with raw material made
of SUS304. There is enough layer of heat preservation between inner and outer of tower
body, The filled material is fine glass cotton, The tower body is also equipped with observation 
door, sight glass, lamp-house and control instruments that is controlled and displayed
through electric control panel.
The heat source of the set may be steam or electric heater, lts feature are convenient in 
operation, quick in start, compact structure, clean of hot air and so on, Moreover being installed 
control and regulating device inside electric control cabinet, the inlet temperature can be controlled 
through stepless regulation. The steam, coal fule can be applied to the place where has not 
electricity. It can replace electric heating locally or fully, The factory can previde different heating 
method in accodance with the practical condition of customer.

Features 
1.The dry speed is fast, the surface area of raw material liquid after atomized will be increased 
greatly, 95%-98% of moisture can be evaporated at moment, 
the time of drying needs about ten seconds to several-tens seconds, it is suitable for 
drying  material particulary.
2.The finished product is ball granule with uniform size, Its fluidity and solubility are good, the purity of product is high and its quality is good.
3.The scope of  application is wide. According to the characteristics of raw material. 
it can use hot air to dry or use cool air to granulate, it has strong adoptability to raw materials.
4.Its operation is simple and stable, control is simple and convenient, and easy to realize automatic 
operation.

Technical Parameter

Item \ Model	Unit	50	100	150	200	300	500	1000
water evapo-  ration capacity	kg	50	100	150	200	300	500	1000
overall dimension (Φ×H)	mm	1600×  8900	2000×  11500	2400× 13500	2800×  14800	3200×  15400	3800×  1880	4600×  22500
high-pressure  pump pressure	mPa	2~10
power	KW	8.5	14	22	24	30	82	30
inlet air  temperature	oC	140~350
product water  contents	%	<5(0.5)
collection rate	%	>97
electric heater	KW	75	120	150	temperature is lower than 200,the  parameters should be calculated
electricity  +steam	Mpa+KW	0.5+54	0.6+90	0.6+108	according to the practical condition
hot air furnace	Kcal/h	100000	150000	200000	300000	400000	500000	1200000

Scope of Application 
Chemical indudtry : Organic catalyst, resin, synthetic washing powder, oils,
thiamin, intermediate of dyestuff, white carbon black, graphite, ammonium phosphate and
so on.
Foodstuff : Amino acid and similar subatances, flavoring, protein, starch, dairy products, extractive. 
From coffee, fish powder, extractive from meat and so on.
pharmaceutical : Chinese traditional medicines, pesticide, antibiotic, medical drinking
and so on.
Ceramics : Magnesium oxide, kaoline, all kind of metallic oxide, dolomite and so on.
Granulating through atomizing : All kinds of fertilizer, aluminium oxide, ceramics powder
pharmaceutical, heavy metallic super hardness steel, chemical fertilizer, washing powder, Chinese 
patent medicines and so on.
Granulating though atomizing cooling : Amino fatty acid, paraffin wax, glycerate, tallow
and so on.
The dryer in the fields of aomizing crystal, concentrate, reaction is used often.





 

Angle Root Milling Machine for Angle Tower Fabrication

The machine used for angle root milling, mainly in the field of angle steel tower industry, electric power fittings, structure storage facilities, and steel structure construction industries etc.

Warehouse:

Manufacturing customer oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever. Therefore, we never compromised with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc., which help control quality, increase work efficiency and guarantee products' stability, reliability and precision. Therefore, the enterprise can achieve rapid and sustainable development.  
 

Team:

We are a team of experienced and dynamic professionals who are experts in handling precision work through scientific processes. The professional excellent talents unite a powerful and creative team of design, research and development, which build our solid technical strength and competitiveness. And our company is developing fast and supply specialized service to all customers.

Angle Root Milling Machine

Angle Root Milling Machine,Mini CNC Milling Machine,Angle Heel Milling Machine,Angle Steel Root Milling Machine

Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com