(1) Checking the bowl-shaped tile; (2) Check the wear of the taper sleeve and the straight sleeve and check the gap; (3) Checking the bevel gear meshing clearance; (4) Check the clearance of the drive bush; (5) Checking the hydraulic device (if the device has a hydraulic device) and lubricating device or replacing the lubricating oil; (6) Cleaning of main parts. The medium repair cycle is cleaned once every 4-6 months. The main contents include: (1) replacing the liner; (2) repairing or replacing the eccentric bushing, the taper sleeve and the straight sleeve; (3) repairing or replacing the bowl tile and dustproof device; (4) repairing or replacing the bevel gear, the transmission shaft and the bearing bush; (5) repairing the adjustment ring and the support thread; (6) Carrying out all inspections and handling of minor repair projects; (7) Decompose the motor, blow dust and descaling and check the bearing bush clearance of each part; decompose the oil switch, clean and deal with the defects; adjust and test the electrical appliances of each department; check and repair the switchboard and other cables. The overhaul is about four years or based on actual conditions. Its contents include: (1) repairing or replacing the frame and the basic part of the problem; (2) Carrying out all inspections and treatments of the intermediate repair projects and carrying out technical transformations; (3) Replace the stator coil of the motor (determined according to the preventive test) and dip the paint; decide whether to replace the rotor shaft according to the actual situation. Regardless of overhaul, medium repair, and minor repairs, detailed records should be made, and the repair plan should be numbered in advance to prepare spare parts, materials, and tools.
EvoTec Marine Generator including Shunt Generator ,High Efficient Marine Generator,Standby Generators,Double Bearing Marine Generator.Our alternator are widely used in industry, commercial, real estate, hospital, hotel, railway, telecommunications, data-centers and mining etc.
Ambient Temperature: 40
High Efficient Marine Generator Shunt Generator,High Efficient Marine Generator,Standby Generators,Double Bearing Marine Generator EvoTec Power Generation Co., Ltd , https://www.evotecgen.com
The specific technical features are listed below:
Speed: 1500rpm or 1800rpm
Frequency: 50 Hz or 60Hz
Number of Poles: 4
Power: up to 3500KVA
Voltage: 110V-690V,High Voltage:3.3KV-13.8KV
Insulation: class H
Power Factor: 0.8
Voltage Regulation Rate: ±0.5%
Altitude: 1000M
Temperature Rise Class: class H
Overload:10% for 1 hour in every 12 hours
Degree of Protection: IP21 (IP23, IP44, IP54 on request)
Special Features:
Double Bearing Marine Generator
What is the content of the overhaul, medium repair and minor repair of the cone crusher?
The inspection cycle should be determined according to the actual conditions of the equipment. The minor repair cycle is carried out every half month to one month, and its contents include: