Nanpi Jiantong Hardware Manufacturing Co.,Ltd. offers a wide range of Deep Drawing services.
Material grade: stainless steel 304, stainless steel 316
steel DC01,DC04,ST12,Q235,SJ235R
galvanized steel sheet DX51D
Stock thickness ranges from 0.30mm-6.0mm for stainless steel
0.30mm-3.0mm for copper
0.30mm-6.0mm for aluminum
0.20mm-6.0mm for carbon steel
Surface finishing: polishing, satin blasted,powder coating, electro plating,anodize
Application: motor housing, metal cover, caps etc.
Deep Drawing Parts,Deep Drawing Sheet Metal,Deep Drawing Steel,Custom Deep Drawing Parts Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , https://www.sheetmetals.nl
The ship's design is tailored to the customer's requirements, and Wärtsilä's integrated solutions include initial design and basic, detailed design. In addition to the design, Wärtsilä will also supply an integrated plant system solution, including a 10-cylinder Wärtsilä 31 mainframe, two 9-cylinder Wärtsilä 20 auxiliary engines, a Wärtsilä two-speed gearbox, a controllable pitch propeller, and a stern duct seal. With bearings, ProTouch propulsion remote control systems, power and automation systems, hybrid battery PTI/PTO packages, etc. Wärtsilä's orders were acquired in the fourth quarter of 2016, the integration plan is expected to be delivered in the fall of 2017, and the new ship is scheduled to be delivered in the summer of 2018.
It is reported that Wärtsilä's hybrid propulsion program also uses batteries as support, with obvious environmental effects, and low pollution emissions. This is also the first processing transport ship in the global fish farming industry. By absorbing most of the fluctuations in engine load and ship load changes through the battery, the engine can operate close to its optimal design point, providing the highest efficiency, which in turn will minimize emissions.
The Wärtsilä 2-speed gearbox will help reduce propeller speed and optimize propulsion during transport, while still using the mainframe as a shaft generator. Custom-designed adjustable pitch propellers for Wärtsilä's successful G-hub structure propellers will be combined with HP nozzles. These devices will not only provide maximum reliability and efficiency but are also a popular choice for ships in this operational profile.
Riku-Pekka Hägg, vice president of ship design at Wärtsilä, said, “The fish farming industry, like other shipbuilding industries, is looking for better ship design and efficiency, which reduces overall operating costs and environmental impact. It is a pleasure to be selected. Serve this project."
Wärtsilä was awarded ship design for a new squid processing transport ship
Recently, Wärtsilä Group announced that it has obtained a contract to provide ship design for a new squid processing transport ship. It is reported that the new ship will be built by the Norwegian shipowner Hav Line AS from the Balenciaga shipyard in Spain.