(1) When the contact between the main shaft and the taper sleeve is more than 3 mm, or the crack is found, the main shaft should be replaced; (2) When the wear of the lower cone of the moving cone is more than 1/2 of the height of the ring, the steel plate shall be repaired; (3) When the spherical surface of the body is worn more than 4 mm, or when the lower end of the body cone is more than 4 mm in contact with the lining, the body should be replaced. Our stamping Bearing Housing is with dust cover and seals. The Bearing Housing Cover and Seal are also with high quality. We have precision inspection equipment to test the bearing housing and seals. Bearing Housing Cover and Seal Bearing Cap,Bearing End Cap,Ball Bearing Block,Bearing And Housing Qufu Zhuoyue Heavy Industry Science&Technology Co., Ltd , https://www.zhuoyueindustry.com
What are the contents of the repair of the cone crushing motor cone?
The contents of the moving cone are: