1. To ensure the tank truck is clean, the tank and the oil delivery system should be cleaned periodically. The internal and external joints at both ends of the oil hose should be coated with lubricating oil. The tank truck can be easily and conveniently disassembled and installed. After each time the tubing is completed, clean it in time to ensure that it is clean inside! 7. The tanker truck should be equipped with a special fire extinguisher and should be equipped with a tow subway chain and a lightning rod. When driving, the tow subway chain should be in contact with the ground; when refueling or draining, it must be inserted into the damp ground. Hand Grip,Arm Exerciser,Wrist Training Exerciser,Wrist Exerciser nantong pinli fitness co.,ltd , https://www.cnpinlifitness.com
2. The use and maintenance of the tanker oil pump is strictly performed according to its use and maintenance instructions!
3, before refueling operations, must use the plug to insert moisture into the wet land, the tanker grounding tape should be grounded, the operation process should always maintain good static conduction!
4, tanker safety valve, filter network should always check and clean!
5, tanks and piping systems should be cleaned regularly. The tanker regularly checks whether the joints of the pipeline system are well connected and the seal is reliable!
6. The electrostatic tanker shall be installed in accordance with the regulations. When static electricity encounters a highly flammable gas that remains in the car, an explosion occurs. The static electricity belt frequently rubs against the car body, etc. The space where static electricity is easily generated can be effectively removed. Electrostatic hazards to ensure that the body is not compromised. Installation method: Install in the metal part of the chassis! After a period of wear, the rubber band on the top can be put down! Conditional users can install electrostatic tanker grounding alarm
8. Oil tank filling hole should be tightly sealed. The oil discharge valve and oil discharge pipe should be free of leakage. The tank vent hole should be open. The oil pump oil filter should be cleaned frequently. The two ends of the oil supply hose should be installed immediately after use. Cover, no dirt can enter.
9. The gasifier and exhaust pipe of the internal combustion engine must not be tempered. The exhaust pipe should be installed in front of the vehicle.
10. Tanker workers must not wear nailed shoes. It is forbidden to smoke near the oil tank and fire is strictly prohibited.
11, when parking, should stay away from the fire, hot season should be selected for parking in the shade. During a thunderstorm, it must not be parked under trees or under high-voltage lines. When parking in the middle of driving, there should be special care.
12. During the inspection and repair process, if the operator needs to enter the oil tank, it is strictly prohibited to carry fire, and there must be reliable safety protection measures. There must be special person monitoring outside the tank.
13. All electrical devices in the vehicle must be well insulated and no sparks are allowed. Vehicle work lighting should be a safety light of 36V or less.
14. When the tank sedimentation tank is frozen, it is forbidden to bake it with fire, use hot water, steam to melt, or thaw the car into the hothouse.
15. When carrying out maintenance and inspections under the vehicle, the internal combustion engine should be turned off, the hand brake should be tightened, and the wheels should be firmly secured.
16. When the vehicle is required to be tested after being repaired, it should be driven by a qualified person. The vehicle must not be loaded with people and loads. When the vehicle is to be tested on the road, the commissioning license issued by the traffic management department should be affixed.
17. When parked on a slope, a reverse gear should be hung on a downhill parking, a gear should be hung on an uphill parking, and a triangle wooden wedge should be used to tighten the tire.