Motorcycle Swing Arm Parts,Oem Motorcycle Swingarm Parts,Alloy Motorcycle Custom Swingarm,Honda Monkey Alloy Wide Swingarm ZETHS Vehicle Technology Co.,Ltd , https://www.zethscn.com
Compression garbage trucks consist of sealed garbage containers, hydraulic systems, and operating systems. The entire vehicle is fully sealed, self-contracted, self-dumping, and sewage in the compression process all enter the sewage chamber, which completely solves the problem of secondary pollution in the garbage transportation process. The key components are imported components, which have high pressure and are sealed. Good, easy to operate, safe and so on. After the optional hanging bucket turning mechanism or trash dumping mechanism.
Compression garbage trucks and other garbage trucks have prominent features:
1. The method of garbage collection is simple: change the messy appearance of garbage bins on the streets of the city to eliminate secondary pollution.
2. High compression ratio and large load: The maximum crushing pressure is 12 tons, and the loading capacity is equivalent to two and a half times that of non-compressed garbage in the same tonnage class.
3. Automated work: The use of imported computer control systems, all of which require the driver to operate in filling and unloading operation, not only reduces the labor intensity of the sanitation workers, but also greatly improves the working environment.
4. Good economy: When the special equipment is working, the computer control system will automatically control the throttle.
5. Double insurance system: The operating system has the dual functions of computer control and manual operation, which greatly protects and increases the use rate of the vehicle.
6. Turnover mechanism: The flip mechanism with a trash can (or bucket) is optional.
Problems and Countermeasures of Compact Garbage Trucks .
1. Large noise in operation Domestic compression type garbage trucks have problems such as large operation noise and disturbance to people. When designing and manufacturing garbage trucks, vehicle chassis, engines and power take-off devices should be carefully selected to take measures to enhance the smoothness of system movement, reduce noise, use materials that can absorb noise, and the structural design should be able to reduce vibration: through hydraulic systems and The optimization design of the loading mechanism improves the machining accuracy and assembly quality so as to reduce the noise of the vehicle operation.
2. Poor sealing reliability Due to the characteristics of domestic solid waste mixed with solid-liquid mixture, in order to realize the drip leakage without garbage filtration in the collection and transportation process, the following methods can be adopted.
(1) Install an edge baffle between the stuffer invert filler and the loader to prevent waste from leaking.
(2) The floor of the cabin should have a certain slope to prevent leakage of landfill leachate.
(3) Install a sump tank at the bottom of the obturator to store the dripping water between the carriage and the obturator.
(4) Strengthen the seal between the loader and the carriage to prevent leakage of waste and landfill leachate during the compression process.
3. Low utilization rate of load quality Reduce the self-quality of the compressed garbage truck and increase its load utilization rate, which will reduce vehicle operating costs. Due to the complex structure of the compression type garbage truck and its high quality, the chassis of the vehicle design should give priority to the selection of domestic chassis with high technical content, good dynamic performance, lighter self-quality and higher cost performance: high-strength materials are used to reduce Top-mounted self-quality; fenders, trims, cover plates and other auxiliary parts can use less dense injection molded parts, using higher integration components to reduce space occupation and self-quality, and at the same time help improve the hydraulic system. Work performance.
4. Comfort of operation Improve the comfort of driving operation, reduce the labor intensity of driving operators. In order to improve the handling performance, the mechanical control was changed to electronic control and the electronic monitoring system was equipped.