However, at present, the trend of rapid decline in energy consumption has changed. In 2009, the comprehensive energy consumption per million yuan of output value of the group company fell by only 1.61% from the previous year, and the decline rate was greatly reduced. The difficulty of energy saving and emission reduction will continue to increase in the future, and the energy saving and emission reduction phase has come. On October 26, 2009, the State Council formally declared its action goal of controlling greenhouse gas emissions and decided that by 2020, the carbon dioxide emissions per unit of GDP will fall by 40% to 45% compared with 2005. According to preliminary forecasts, to achieve the government's commitment to carbon reduction targets must be based on the "Eleventh Five-Year Plan" to achieve the goal of 20% energy conservation, "Twelve Five" or "Thirteenth Five-Year" to continue at least 15% energy-saving emission reduction. This goal and task is quite arduous. The country's emission reduction targets will ultimately be allocated to various localities, industries, and enterprises. Sinopec Corp. is not only a production enterprise but also a big energy consumer and a large carbon emitter. No matter from the perspective of corporate management or social responsibility, it is bound to face enormous pressures for energy conservation and emission reduction. During 2010 and the “Twelfth Five-Year Plan†period, the Group’s chemical plate production capacity will grow rapidly, resulting in a substantial increase in energy consumption, and the Group’s unit energy consumption will also be significantly higher. Changes in oil quality, oil and gas production and structural changes, unbalanced development among enterprises, and unsmooth management mechanisms for energy conservation will also bring challenges to energy conservation and emission reduction, and the energy conservation and emission reduction situation will become more severe. In 2010, Sinopec has identified key tasks for energy conservation and emission reduction: to heighten awareness of energy conservation and emission reduction from the perspective of addressing climate change; to integrate energy conservation and compliance standards with the company's medium and long-term development goals, and to improve energy efficiency against the advanced level at home and abroad. Targeting activities; increasing investment in energy conservation; further promoting the promotion of new energy-saving technologies and energy-saving special projects; conducting energy-saving audits and energy-efficiency testing work to tap the potential of energy conservation in enterprises; improving the overall optimization of energy use in the whole plant and improving the overall efficiency of energy use Establish an energy management center, use information technology, improve the level of energy use, and do a good job of receiving national monitoring and assessment work. Wang Tianpu, vice chairman of the board of directors and president of the company, emphasized at the meeting that energy saving and emission reduction is directly related to the survival and development of the company. It is both the social responsibility of the company and the historical responsibility of each petrochemical company. To pay more attention to the control of greenhouse gases during the emission reduction process, we must not only control the overall emissions of pollutants, but also gradually incorporate carbon emission reduction targets into the content of energy conservation and emission reduction work, and strictly control them. It is necessary to further enhance the urgency of emission reduction work and turn pressure into motivation to promote and promote the effective implementation and implementation of various measures. To combine the national energy-saving emission reduction goals and the characteristics of China's petrochemical industry, make energy-saving and emission-reduction planning work from level to level, determine goals, and specify measures. Sinopec is a high-energy-consuming industry. It must bear in mind the responsibilities, high standards and strict requirements. It must take the lead in China and the international first-rate target to do a good job of energy-saving and emission-reduction work to ensure that energy-saving and emission-reduction work is at the forefront of key central enterprises. We must look at the gap between each sector in comparison with the international advanced level; compare the level of energy consumption and identify the gap in the industrial structure. It is necessary to further establish a long-term mechanism, sort out management responsibilities, and continuously deepen fine management. At the same time, it is necessary to implement all key measures with a strong execution force, increase the intensity of measures, effectively strengthen control, change the mode of economic development, and ensure that energy conservation and emission reduction targets are achieved. Wang Zhigang, senior vice president of the company, attended the meeting. Dai Houliang, senior vice president of the company, presided over the meeting. The conference commended the 2009 energy-saving advanced units, the award-winning units, and similar competition winners.
26 Inch Alloy Wheel is suitable for SUV PICKUP for Japan and Euro.USA.NORTH AMERICA.
We are the professional alloy wheel manufacturer since 2004, dedicated to low-pressure casting for 15 years. Our main market is to make exclusive mold and high-quality wheels for brands all over the world. Good reputation with 100% brand protection and high quality. 26 Inch Alloy Wheel,Lightweight Wheel,Black Full Painted Wheel,Six Spoke Big Size Wheel China Wheel (Taishan) Co.,LTD , https://www.tcwwheels.com
Special Service:
1. We provide timely per-sale and after-sale service: Before the sample/mass production order placed, all details will be checked and confirmed with customers; We can accept sample order for testing first. Also we have a free sample policy if you place an order to us
2. We provide LOGO customizing (Milled Letters and Word) on wheels;
3. Center caps and Carton LOGO customizing;
4. Wheel's finishing can be your requested.
5. We can do forged and Lower pressure
Packing:
Normally packing there are PE foam\ guard ring\cardboard\ non-woven cap\ plastic bag\ instruction book, total packaging with carton. Pallet packaging is also available
Delivery: full painted+ 25-30days, machined face +30-35days
How do you ensure wheel quality and solved quality problem after sales?
Every wheel is physically tested in compliance with JWL VIA or TUV standard; we have internal small label on the wheel rim and steel stamp for control the wheel's production, Our team ensures the production process at every stage and our QC will inspect each procedure as well. While wheels have quality problems, take photos or videos of the problems and our small label send to us. You can send back the problem goods or we will send our representative for inspection. When we confirm it's our problem, we will cut the same account or send the wheels in the next order.
Sinopec's energy saving and emission reduction
On March 15, the reporter learned at the 2009 annual meeting on energy efficiency standards held by the group company. From 2005 to 2009, the comprehensive energy consumption per million yuan of production value of the group company decreased by 15.38%, and the energy saving amount was 13.27 million tons of standard coal, not only Exceeded the second term mandate of the State-owned Assets Supervision and Administration Commission of the State Council for the release of central government officials, and also fulfilled the "Eleventh Five-Year Plan" energy conservation responsibility target signed with the National Development and Reform Commission in advance. All indicators are in the leading position in the petrochemical industry.