Supporting Equipment of Plating Line
Supporting equipment of plating line such as filter, rectifier,etc.
It includes: Rectifier system,DC conductive copper bar or cable, Filter system, Filter piping, Post-treatment dryer, Water chiller, Ultrasonic generator, Cooling water tower, Stainless steel heat preservation water tank (with level gauge and alarm) and horizontal water pump and piping system, Circulating pump and piping system between chiller and cooling tower, Secondary wiring of supporting equipment,Coarse regeneration device, Automatic dosing and conductivity meter.
In order to complete the electroplating process according to the process requirements, it is not enough to have a power supply and a plating tank, and there must be some auxiliary equipment to ensure the normal production of electroplating. Including heating or cooling equipment, cathode moving or stirring equipment, plating solution circulation or filtering equipment, and necessary accessories for plating tanks such as electrode rods, electrode wires, anodes and anode baskets, plating hangers, etc.
Supporting Equipment Of Plating Line,Electroplating Equipment,Filter Equipment In Plating Line,Rectifier Equipment Of Plating Line Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com
Dim.: 264*164*3.5mm, 10 friction buttons 40 holes with 10 grooves.
Packaging: 5 PCS per box, exterior with fiber board box pallet(non wooden box);
We have three clutch button formula currently, one is our regular formula, smooth finish and medium property, another is the low wear formula with rough finish, the third one is a new formula, it's developed with the assistance of the oversea engineer, and this button is following Miba appearance and similar to its finish and property, it is supplied to our OE customers, due to its low cost and excellent property, it is very popular among our customers from South America and India.
One of our formula, the property as follows:
1) Friction coefficient: 0.49-0.58(regular)
Wearing rate: 0.05-0.18(regular).
2) Surface Hardness of button: BHN 25+/-5.
3) Bend test result: Passed, no bearing area on the back plate.
Sinered Pads for Racing Cars, Racing Disc (B10000) , Ceramic Clutch Disc
Model NO.: B10000
Working Mode: Power Combining
Working State: No linkage
Voltage: 0
Electromagnetic Clutch: 0
Size: 264*164*3.5mm
Trademark: Fricwel
Transport Package: Box+Pallet
Specification: GB/T 5764-1998
Origin: China
HS Code: 8708931
High Performance Racing Disc B10000