Rubber Dispersion Kneader Machine for Rubber or Plastic Internal Mixing

 Dispersion Kneader for Rubber or Plastic Internal Mixing

Main Structures: 

Mixing chamber:

Manufacture ω plate based on the special technology and two side boards made of high quality steel plates by means of extrusion forming and welding, which are jacked to take the flow of cooling water or steam. It is plated with hard chrome on its internal walls.

Thermal Resistance: 

There is a plug-in thermal resistance in middle section of the bottom of the chamber to be connected to electrical system to inspect and display the temperate.

 

Rotor: 

It is designed to the hollow blades of Banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are surface welded with cobalt-base hard alloy and grinding, then plating with hard chrome and polishing.

 

Cooling/heating system: 

A common piping system is adopted for either cooling or heating material in mixing operation. Through the system cooling water or steam is fed in three ways to the cavities of the rotors blades, the chamber and the top ram.

 

Tilting mechanism: 

It consists of a rotor with brake, cycloidal gear reducer, TP type worm and worm gear, etc.. It is able to actuate the mixing chamber tilting by 140° around the front rotors.

 

Dust sealing device: 

our patented sealing technology adopts five kinds of sealing structures and three sealing defensive lines, completely solves the worldwide difficult problem of powder leakage,he sealing system will keep the machine never leak powder within 3 to 5 years.

The stationary seal ring is made from the tin bronze,which size is times than the normal one. and its  structure is specially designed.The sealing system is easy for maintain and replacement.

At the joint between the top of the mixing chamber and the cantilevered arm of the machine frame, the dust sealing assemblies with curved slotted partings are used obtaining an excellent and reliable sealing purpose.

The end face of the rotor is sealed by end contact sealing with nor oil-lubrication and is seals well and is wear-resistant and durable.

 

 Main driving system:

The part is made up with main motor, reducer, connecting gears. It realizes odd-speed rotation of the rotors with running face one other.

We use the hardened-gear reducer which specialized for roll over mixer,it ensure the abrasion resistance, while keeps the gear toughness.

 

Pneumatic control system:

Pneumatic control system is controlled by XG order. The bi-directional air cylinder makes the ram up or down. In case the over load occurs in the mixing chamber, the top ram can be raised automatically or manually if necessary, so as to protect motor from overload.

 
Electric control system:(the motor is Siemens brand)

 Imported PLC device and electric control components which are all imported products or imported technology products are adopted in the electric control system as to raise control reliability.

 

Advantages:

(1)Maximum Dispersion & High Production

 Double blades, proper clearance & high cooling effect gives excellent dispersion , Its production is 4 to 5 times  thus saving on labor and  the electricity about 30%.

(2)No Foundation Requirement

The Kneader has a common bed plate for all parts and not require foundation. 

(3)Easy Cleaning & Colour Change

 Mixing chamber can be tilted which enables easy cleaning, because of this, different coloured compounds can be made without trouble.

 

Technical Parameter: 

 




   

•  
• 

  

   

   

Capillary Tube

High quality Refrigeration air conditioner connecting copper pipe,High-end Conditioner Connecting Copper,Copper Tubes for Plumbing,Pancake coil capillary copper coil,Metal Seamless Tube straight

Our company has always had strict quality control standards in the market of refrigeration and heat exchange equipment, focusing on providing customised services to our customers. Not only do we have high requirements for the selection of raw materials, but we also keep up to date with the latest production processes and have high testing standards.


Our company mainly produces products for:Fin Evaporator.Fin Type Condenser.Capillary Tube. Coolant Reservoir.Plate Reinforcement Parts.Stamped Parts.Aluminum Tube.Instrument Testing Equipment.

If you have any interest, please feel free to contact us. We can provide customized service according to your drawings or samples.

Capillary Tube,Coil Tube Evaporator,Evaporator Copper Tube,Evaporator Coupling Tube

Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.ycevaporator.com