Railway Stations Security Equipment Hand Held Metal Detector

First.Usages:
Airports , railway stations , docks , schools, electronic detection checks
Customs ,border , security departments safety inspection
Medicine, food quality inspection business systems
Important place , playground , playground safety inspection
Precious metal detection, such as gold and silver jewelry factory, copper metal factory
 
Scond.Detection range :
1, the pin 35-65mm
2 , Tiananmen-style 160mm
3 , 30mm diameter nails
4 , Ball 100mm
 
Third.characteristics:
1 , high sensitivity hand-held metal detectors.
2 , beautiful appearance , easy to operate , no adjustment .
3,9 V battery down to about 7V, can detect the distance constant.
4 , energy saving , sustainable work more than 20 hours .
5 , when the battery runs out , there is continuous alarm sound, and there is a yellow light indicates undervoltage .
6 , there are startup, shutdown voice prompts .
7 , there is an external charging jack ( charger should bring their own ) .
8 , a sound and light , vibration switch
 
Four, replace the battery installed
1 , with the thumb within the groove back to open the battery cover.
2 ,Press the battery cover positive and negative symbols loaded 6F22 (9V) battery.
3 , replace the battery cover to push forward tight .
Note : The battery -supplied or factory purchasing .
 
Fifth, How to use:
1, forward push the power switch , hear "click " sound , that is, the power is on , but the green light , which in this case sounds alarm function. If there is no sound means no battery or the battery is bad, continuous and sound , the battery voltage, can not be reused and should be replaced .
2 , the sound stops after boot , high-sensitivity detection can be carried out , the hand holding the handle will detect faces being swept around the probe to detect objects with that sound an alarm when a metal object , while a green light turns red ; stopped sweeping probe , the alarm sound stop, red to green .
 
Sixth, sensitivity adjustment :
1, if less than the required detection range when sensitivity is so high that they require or cause instability when the human body without metal or geophysical sweep also alarm, sensitivity adjustment should be carried out .
2, with a small flathead screwdriver to get a handle inserted into the hole from the detector rotates clockwise , raised voice, then counter-clockwise and then counterclockwise raised just does not sound half turn , sensitivity to meet the requirements.
 
VII Note :
1 , after using forget off the power.
2 , long-term use should be shut down without removing the battery .
3 , when the probe is fixed against the metal does not sound to indicate when swept metal sound.
4 , turn off the power switch when charging.
5 , Charger Voltage : AC 9V; DC 10V. ( Bring your own charger )
 
Eight , technical parameters:
  Power: 270 mW
  Operating frequency : 22 kHz
  Working current: < 50 mA
  Voltage :7-9V
 Operating temperature : -5 ° C to 55 ° C
  Weight : 360g
  Dimensions : 39.8mm * 8mm * 3.5mm ( LxWxH )
 
Package include:
1 x metal detector
1 x english manual.

First.Usages:
Airports , railway stations , docks , schools, electronic detection checks
Customs ,border , security departments safety inspection
Medicine, food quality inspection business systems
Important place , playground , playground safety inspection
Precious metal detection, such as gold and silver jewelry factory, copper metal factory
 
Scond.Detection range :
1, the pin 35-65mm
2 , Tiananmen-style 160mm
3 , 30mm diameter nails
4 , Ball 100mm
 
Third.characteristics:
1 , high sensitivity hand-held metal detectors.
2 , beautiful appearance , easy to operate , no adjustment .
3,9 V battery down to about 7V, can detect the distance constant.
4 , energy saving , sustainable work more than 20 hours .
5 , when the battery runs out , there is continuous alarm sound, and there is a yellow light indicates undervoltage .
6 , there are startup, shutdown voice prompts .
7 , there is an external charging jack ( charger should bring their own ) .
8 , a sound and light , vibration switch
 
Four, replace the battery installed
1 , with the thumb within the groove back to open the battery cover.
2 ,Press the battery cover positive and negative symbols loaded 6F22 (9V) battery.
3 , replace the battery cover to push forward tight .
Note : The battery -supplied or factory purchasing .
 
Fifth, How to use:
1, forward push the power switch , hear "click " sound , that is, the power is on , but the green light , which in this case sounds alarm function. If there is no sound means no battery or the battery is bad, continuous and sound , the battery voltage, can not be reused and should be replaced .
2 , the sound stops after boot , high-sensitivity detection can be carried out , the hand holding the handle will detect faces being swept around the probe to detect objects with that sound an alarm when a metal object , while a green light turns red ; stopped sweeping probe , the alarm sound stop, red to green .
 
Sixth, sensitivity adjustment :
1, if less than the required detection range when sensitivity is so high that they require or cause instability when the human body without metal or geophysical sweep also alarm, sensitivity adjustment should be carried out .
2, with a small flathead screwdriver to get a handle inserted into the hole from the detector rotates clockwise , raised voice, then counter-clockwise and then counterclockwise raised just does not sound half turn , sensitivity to meet the requirements.
 
VII Note :
1 , after using forget off the power.
2 , long-term use should be shut down without removing the battery .
3 , when the probe is fixed against the metal does not sound to indicate when swept metal sound.
4 , turn off the power switch when charging.
5 , Charger Voltage : AC 9V; DC 10V. ( Bring your own charger )
 
Eight , technical parameters:
  Power: 270 mW
  Operating frequency : 22 kHz
  Working current: < 50 mA
  Voltage :7-9V
 Operating temperature : -5 ° C to 55 ° C
  Weight : 360g
  Dimensions : 39.8mm * 8mm * 3.5mm ( LxWxH )
 
Package include:
1 x metal detector
1 x english manual.

Control Box

Starter Part,Auto Engine,Control Box

Pump & Vacuum Equipment CO.,Ltd , http://www.nssubmersiblepumps.com