Zhejiang Ideal Bell Technolody Co., Ltds , https://www.idealpneumatics.com
Oil water separator product classification
A machine for separating oil and water, Shanghai Sen Green environmental protection and energy-saving introduction technology, usually used for catering treatment of sewage, because of environmental protection requirements, so the sewage generated by the ship machinery and equipment in the rivers and lakes must be treated, need Use a water separator.
Air compressor
The compressed air oil-water separator is used for separating impurities such as moisture and oil which are condensed in the compressed air, so that the compressed air is initially purified, and the general pressure is 0.1Mpa-2.5Mpa.
The working principle of compressed air oil water separator:
When the compressed air enters the oil-water separator, it produces a sharp change in flow direction and speed, and then relies on inertia to separate oil droplets and water droplets having a density larger than that of compressed air. Commonly used are percussive oil-water separators and toroidal rotary oil-water separators. After the compressed air enters the oil-water separator housing from the inlet, the airflow is firstly blocked by the baffle and deflected back down, and then rises upwards to produce a circular revolution. In this way, water droplets and oil droplets are separated from the air under the action of centrifugal force and inertial force and settled at the bottom of the casing, while another oil-water separation system uses a stainless steel mesh coalescing filler inside and a steel welding tank for the casing. Body structure, generally used pressure is 0.1Mpa-2.5Mpa. The principle is to use the organic combination of cyclone and stainless steel wire mesh to capture fog, and adopt the mechanisms of direct interception, inertial collision, Brownian diffusion and agglomeration, which can effectively remove dust, water and oil mist in compressed air, remove water and remove oil. Large amount, adapt to a wide range of working conditions.
When a gas such as compressed air containing oil and water is introduced into the oil-water separator, the large droplets fall by gravity to the bottom of the oil-water separator, and the mist-like droplets are trapped by the screen to form large droplets falling to the bottom of the oil-water separator. The entrained liquid is thus separated, and the separated liquid flows into the lower portion and is manually opened to discharge the valve or the lower portion is equipped with an air discharge valve to be discharged from the body.
Marine
The Maritime Environmental Protection Committee of the International Maritime Organization adopted the resolution of IMO.MEPC.107(49) on July 18, 2003. The resolution sets new requirements for the YWC 15ppm bilge oil-water separator in MARPOL73/78 MARPOL Annex I. The marine oil-water separator can effectively treat the bilge water of the emulsion mixture containing various fuel oils, extremely high density, and emulsion mixture composed of iron oxide, surfactant and the like.
Car use
The quality requirements of diesel fuel for vehicles with high-pressure common rail engines under the National Standard are also higher. Because the high-pressure injectors need to control the injection pressure, injection time and fuel injection volume, the workmanship is also required to be more delicate. If there is water or impurities in the diesel oil that are not cleaned, it will cause strain on the plunger coupler in the injector until the injector is stuck. Damage to the injector can cause unstable acceleration or acceleration of the engine, or discharge of black smoke and other faults, affecting the normal operation of the vehicle.
As a grade of multi-stage filter system, the primary fuel filter has the function of filtering out large particles of impurities and moisture.
In order to allow the engine to drink clean diesel, only a "secondary processing" of those oils that do not meet the standard is required. Adding a set of oil-water separator is a simple and practical method.