Infrared thermometers convert radiant energy emitted by an object's infrared rays into electrical signals. The size of infrared radiation energy corresponds to the temperature of the object itself. According to the size of the electrical signal, the temperature of the object can be determined. Today we mainly introduce the scope of application of infrared thermometers, hoping to help users better application products. First, infrared thermometer in the steel industry The steel industry uses thermometers because the products are all in motion and the temperatures are very high. The common steel industry application is that the temperature is a continuous state and the melted steel begins to transform into blocks. Reheating the steel with the same temperature is the key to preventing it from deforming, and an infrared thermometer is used to measure the internal temperature of the regenerator. In high temperature rotary mills, infrared thermometers are used to confirm that the product temperature is within the limits of rotation. In cooling mills, infrared thermometers monitor the temperature of the steel during the steel cooling process. Second, infrared thermometer in the glass industry In the glass industry, it is heated to a very high temperature. Infrared thermometers are used to monitor the temperature in the furnace. Hand-held sensors detect high temperatures by measuring outside. The temperature of the molten glass is measured to determine the proper temperature of the furnace mouth. In flat glass products, the sensor detects the temperature at each processing stage. Incorrect expansion or contraction can result from erroneous temperatures or excessive temperature changes. For bottles and container products, the molten glass flows to the forehearth that is kept at the same temperature. Infrared thermometers are used to detect the temperature of the glass in the forehearth. So it should be in an appropriate state where it is exported. In glass fiber products, infrared sensors are used to detect the temperature of the glass of the forehearth in the processing furnace. Another use of infrared sensors in the glass industry is in the windshield process. Third, infrared thermometer in the plastic industry In the plastics industry, infrared thermometers are used to prevent products from being contaminated, to measure dynamic objects and to measure high temperature plastics. During blowing of the blown film, temperature measurements to adjust to the heating and cooling can help maintain the integrity of the plastic's tension and its thickness. During the ejection of the cast film, the sensors help control the temperature to ensure that the product is the same thickness and uniformity. When the sheet is pressed out, the sensor allows the operator to adjust the extinguished heater and cold roll to ensure the quality of the product. IV. Infrared Thermometer Chemical Industry In the petrochemical industry, refineries use temperature display systems in routine preventive maintenance procedures. These procedures include furnace process monitoring and confirmation of thermocouple indications. In the furnace process inspection, an infrared display is used to detect the proportion of heated surface tube carbon build-up. This build-up, called coking, leads to a higher firing rate in the furnace and also raises the tube temperature. This high temperature condition will reduce the life of the pipe. Because this kind of coking will prevent the product from absorbing the heat of the tube evenly. When using an infrared thermometer, we will find that the tube surface temperature in the junction area tends to be higher than the tube surface temperature in other areas. Fifth, infrared thermometer can also play a preventive maintenance With a portable thermal display system, maintenance personnel can identify potential or existing problems. For example: Overheating of the engine coil windings, plugged cooling fins on the transformer, poor capacitor contact, heat build up in the cylinder head of the compressor. Any problem arises accompanied by an increase in temperature, or a temperature curve that is insensitive to ambient temperature, so that it can be positioned using a portable heat display system. In most cases, problems can be identified and corrected in time before the process is stopped. Nanjing Ningbo Analysis Instrument Co., Ltd. 2016.4.06 Bbq Charcoal,Smokeless Charcoal,Smokeless Bbq Charcoal,Barbecue Grill Charcoal GanSu Port Logistics Co.,Ltd , http://www.gskouan.com