With the development of modern machinery processing industry, the requirements for the quality and precision of cutting have been continuously improved, and the requirements for improving production efficiency, reducing production costs, and having high-efficiency automatic cutting functions are also increasing. As a part of the cutting machine industry, the products we provide will be the most modern and technological. Welcome everyone to discuss cooperation. Details:/ Mobile Concrete Batching Plant This product(concrete batching plant) is equipped with the storage, batching, conveying, stirring, control and other devices of various raw materials required for precast concrete, and various aggregates, powders, admixtures, water, etc. A complete set of equipment for supplying concrete in a concentrated manner than by a mixer. Mobile Concrete Batching Plant,Yhzs25 Mobile Concrete Mixing Plant,Yhzs50 Mobile Concrete Mixing Plant,Yhzs75 Mobile Concrete Mixing Plant Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.zeyumixer.com
Laser cutting machine in the lens installation and cleaning process, any one sticky, and even nails printed oil droplets, will make the lens absorption rate increased, reducing the service life. Therefore, the following precautions must be taken:
1, do not use bare fingers to install the lens. Should wear finger or rubber gloves.
2. Do not use sharp instruments to avoid scratching the lens surface.
3, can not touch the film when taking the lens, but holding the edge of the lens.
4, the lens should be placed in a dry, clean place to detect and clean. There should be several layers of cleaning tissues on the surface of a good table and several cleaning lens tissue papers.
5. Users should avoid talking over the lens and keep food, beverages and other potential contaminants away from the work environment.
In the process of cleaning lenses, a relatively low risk method should be used. The following steps are set up for this purpose and should be used by users.
First, use a blower to blow off the float on the surface of the original, especially the lens with tiny particles and flocs on the surface. This step is necessary. But do not use compressed air on the production line, because these air will contain oil mist and water droplets, which will increase the pollution of the lens.
In the second step, the lens was slightly cleaned using pure acetone. This grade of acetone is almost anhydrous, which reduces the possibility of lens contamination. (China Cutting Machine Trading Network)
The cotton ball must be cleaned with acetone in the light and the ring moved. Once the swab is dirty, it must be replaced. Cleaning should be done at one time to avoid ripples.
If the lens has two coated surfaces, such as lenses, each side needs to be cleaned in this way. The first side needs to be put on a layer of clean lens paper for protection.
If acetone can't remove all the dirt, then wash it with vinegar. In vinegar cleaning, the dirt is removed by dissolving the dirt, but it does not damage the optical lens. The vinegar can be of experimental grade (diluted to 50% strength) or white vinegar with 6% acetic acid for home use. The procedure for cleaning is the same as for acetone, and then acetone is used to remove the vinegar and dry the lens. At this time, the cotton balls must be replaced frequently to completely remove the acid and hydrate. Until it is clean.
When the contaminants and lens damage cannot be removed by cleaning, especially if the film is burned due to metal splashing and dirt, the only way to restore good performance is to replace the lens.
ã€China Cutter Trading Network is now giving back to the old and new members, special advertising space for free experience activities, a golden opportunity, first come first served. Log on to the official website for the latest information:/
Editor: zgqgjjyw
Features of concrete batching plant
1.The overall steel structure of the mixing station is made of high-quality steel, which has high overall structural strength and strong stability.
2.The mixing machine adopts the twin-shaft forced mixing main machine, which has strong mixing performance, uniform mixing and high productivity.
3.Excellent pneumatic components, electrical components, etc.; to ensure the reliability of the equipment, accurate metering performance.
4.Each maintenance and repair site is provided with a walking platform or a check ladder, and has sufficient operation space. Easy maintenance and repair