Introduce the characteristics of electric water boiler

The boiler is a kind of water that is transferred to the water inside the container by utilizing the heat energy released after the combustion of the fuel or the waste heat in the industrial production, thereby achieving the effect of heating and the like. In addition, we can tell you that the boiler can also be divided into a variety of types, including electric steam boilers, oil and gas fired boilers, electric water boilers, and electric water boilers. Xiao Bian today shared the features of the electric water heater.

Electric water heater features:

1, configure the computer-type boiler controller, boiler operation intelligent, digital, automated, humane. From 10°C to 100°C, the water temperature can be freely set. The boiler can supply both boiling water and hot water to achieve a dual purpose.

2, the use of advanced ceramic electric heating pipe, high-quality seamless steel jacket, can effectively prevent scale interference, long service life. The heat-absorbing structure adopts a computer optimized design, which fully optimizes the heat transfer coefficient of the heating surface, and the heat efficiency is extremely high, reaching over 98%. Greatly reduce power loss.

3. The boiler intelligently controls the water temperature, the boiler boils the water, and the heating stops automatically; the controller screen shows the water temperature in a large font, and the outside is equipped with a glass-tube water level gauge, the boiler water temperature, and the boiler water level.

4. The boiler is designed according to the atmospheric pressure furnace. There is an atmosphere at the top of the furnace body and the boiler is in a state of no pressure. There is no safety hazard. The user can set the start-up and shut-down time according to the water demand, not only meet the user's requirements, but also save energy and reduce consumption, and reduce the use cost.

5. The boiler automatically replenish water to reach the state of full water. The replenishment water is automatically stopped. There is no need for special guards to save time, save time, labor, and labor.

6, reliable boiler "water separation" structure, to prevent electric heating pipe due to accidental leakage caused by the safety hazards of users and staff, but also in the case of no water, boiler heating components can be repaired, replaced, and maintained.

7. The high-precision water level sensor is used to monitor the water level in real time. The sensor adopts pulse intermittent detection method to judge whether the water level in the boiler is normal. In the case that the outlet temperature reaches boiling water, the boiler automatically fills up the water one after another, and the boiler energy can be filled. Continuous supply of 100% fresh boiled water.

8, the machine is equipped with overheating protection (furnace water temperature is too high, the burner automatically stops working and buzzer alarm, the second overheating protection (boiler shell temperature exceeds 105 °C, automatically cut off the secondary circuit), anti-dry burn Water protection (When the boiler water is below a very low water level, the boiler stops working and emits a buzzer alarm), boiler leakage protection (the control system detects the electrical leakage, short circuit, will automatically cut off the power supply).

9, using aluminum foil centrifugal glass wool multi-layer insulation and famous white color steel plate for packaging, heat loss, beautiful rust resistance.