Instruments and meters are strategic emerging industries. During the 12th Five-Year Plan period, the state will pay more attention to the application and development of scientific instruments. Laboratories are the output of science and technology, and they are the frontiers of education. Therefore, the state's investment in laboratories is very large. Nowadays, laboratories in many universities are places where teachers and graduate students work on their daily work. In the 20th century, various types of physics laboratories were springing up and research work was widely carried out. It can be said that the laboratory is the cradle of science and the base of scientific research. The past five years have been the fastest growing five years since China’s instrumentation industry was founded. At present, China has become one of the largest countries in the international instrumentation industry, and it is also the country with the largest instrumentation industry in developing countries and the most complete product variety. China's instrumentation industry has experienced a rapid and healthy development in the market, with a total output value of three times in ten years. How Does 5-axis CNC MILLING WORK?
CNC milling is complex machining technique which utilizes several types of pre-programmed CAM and CNC controls to build customized components or parts. We are professional custom CNC milling company and 5 Axis CNC Milling Service provider in China, we offer the manufacturing of precision machined parts and solutions at affordable rates to meet the growing demands of the clients across the world.
Cnc Milling,Cnc Milling Machine,Desktop Cnc Mill,Small Cnc Mill Ningbo Rongna Technology Co.,Ltd , https://www.service-machining.com
Although the instrument and meter industry enjoys a good momentum, although there is a big gap with foreign countries, it has never stopped development. In particular, the emergence of many new industries in the past two years has also had a great impact on the instrumentation industry. A small number of products approach or reach the current international level, and many products have independent intellectual property rights. According to the analysis of the data in the first half of the year, the overall operation of the instrumentation industry was better than expected, and both the value of production and sales as well as the profits of the industry achieved double-digit growth, but the growth rates both slowed down. Due to the sluggish international market, the growth rate of the industry's import and export dropped year-on-year, but the speed of the listing of enterprises accelerated, and mergers and reorganizations achieved certain results.
During the "Twelfth Five-Year Plan" period, China's instrumentation industry will focus on the needs of major national projects, strategic emerging industries, and people's livelihood, accelerating the development of advanced automatic control systems, large-scale precision testing equipment, new instrumentation and sensors. The past five years have been the fastest growing five years since China’s instrumentation industry was founded. At present, China has become one of the largest countries in the international instrumentation industry, and it is also the country with the largest instrumentation industry in developing countries and the most complete product variety. "Planning" pointed out that China's instrumentation industry still has domestic product stability and reliability and foreign products have a clear gap, lack of independent innovation capabilities, low concentration, unreasonable corporate structure and other issues.
At present, new technologies such as the Internet of things and smart grids are rapidly developing. The demand for food and drug safety is also highly concerned. The state has put forward more stringent requirements for comprehensive energy utilization and environmental protection, and the economic development environment is changing. For the instrumentation industry provides a broad market and new development opportunities. At the same time, due to changes in the macroeconomic policies of the country’s economic development and changes in the market demand structure, companies must adjust their product structure as soon as possible. Domestic enterprises have only just started in the areas of new technologies and new products such as functional safety technology, safety instrumentation systems, wireless sensor networks, wireless meters, and Internet of Things. The gap between the technological level and foreign countries is obvious, and the industry is facing new challenges.
According to the "Planning" and the "Twelfth Five-Year Plan" period, the development strategy of the instrumentation industry is "to intensify innovation, pay close attention to the basics, market orientation, broaden the scope, innovate the system, optimize the structure, and continuously promote and revitalize the industry." In the next five years, the entire industry will target the mid- to high-end product market, vigorously strengthen the design, manufacturing, and quality inspection capabilities, so that the stability and reliability of domestic products will be greatly improved; aiming at major national projects and strategic emerging industries, the industry The service sector has expanded from facing traditional fields to multiple emerging areas; vigorously promoted the restructuring of the enterprise, focused on building a number of “more than 10 billion†leading enterprises and formed a number of key enterprises with international competitiveness; and strengthened the continuation of the achieved results. Promote and long-term investment, maintain the continuous accumulation of core technologies, and form a mechanism for the sustainable development of the industry.
It is reported that during the "12th Five-Year Plan" period, the whole industry will strive to make exports more than 30 billion U.S. dollars, and export growth will be greater than the increase in imports. At the same time, it basically completes the autonomy of typical equipment control systems in the fields of petrochemical, thermal power, nuclear power, wind power, and rail transit, and basically meets the needs of key areas represented by environmental protection, food and drug safety, and emergency public safety handling.
Milling is the process of cutting and drilling material using a rotating cylindrical tool. This tool is held in a spindle and comes in a variety of sizes and forms. With 5-axis machining, there have two extra rotary axes defined by A, which rotates around the X axis, B, which rotates around the Y axis, and C, which rotates around the Z axis. The combination of additional axes depends on the machine and comes in variations, including AB, AC, or BC.
With 5-axis machining, the table or cutting tool can be tilted, creating the ability to avoid collision with the tool holder and allowing for better access to part geometry. This also ensures improved tool life and cycle time as it helps maintain cutting position and constant chip load. This type of machining offers a push toward single-setup machining, creating shorter lead times and increasing efficiency.