Slime is a difficult-to-dry material. Like urban sludge, if it is dried, it must first solve the feed problem. After the R&D personnel of Zhengzhou Huachang Machinery Manufacturing Co., Ltd. developed the slime dryer and the city sludge dryer, the rotary feed feeding device was used to spin the coal slurry into small pieces and quickly enter the dryer cylinder. . At the same time coal slime is also a flammable product, so we must solve this problem. Slime drying equipment Huachang Machinery R&D personnel have solved this problem by researching and adopting a low-humidity four-stage drying technology. Here we will learn more about the specific four-stage technology of the slime drying equipment : 1. The primary drying zone is dominated by the guide material, and the high humidity In the state, the inlet temperature of 600°C instantaneously exchanges heat with the slime for mass transfer, removes most of the water, and does not easily ignite. 2. The secondary drying zone is a row of bonding zone, the indoor temperature is 450°C; 3, and the tertiary drying The zone is drying in the downstream, and the indoor temperature is 300°C; 4. The four-level drying zone is a high-drainage zone with an indoor temperature of 100°C. The whole process is low-temperature drying, it is not easy to cause coal slurry combustion, and it really has the effect of saving energy and reducing consumption. These two innovative slime dryer, make slime rapidly drying, it is not easy to catch fire. The slime dryer produced by Huachang Machinery has advanced technology, compact structure, fast moisture evaporation, high output, small footprint, stable and reliable operation, and easy installation and testing. Hoist Lift Motor,Engine Crane ,Engine Jack ,Electric Hoist Barrow, Trolley & Cart Co., Ltd. , http://www.nbchainhoist.com
