For more information, please click: Shanghai Gasoline Generator Large gasoline generator Topic: Plastic mold frame: the source of efficient production Die-Casting Mold Base,Terminal Mold Base,Non-Standard Mould Insert processing and manufacturing,Plastic Injection Mould Plastic Parts Shuaigang Mould Base (Yixing) Co., Ltd , https://www.shmouldbase.com
Plastic mold holder, as the name suggests, is a mold used to manufacture plastic products. It plays a vital role in modern industrial production, especially in the automotive, electronics, construction and medical fields, plastic mold frame is widely used. With the continuous progress of science and technology, the plastic mold industry is also experiencing unprecedented changes.
The plastic mold holder is characterized by its efficiency, accuracy and reliability. Compared with the traditional mold, the plastic mold frame adopts advanced materials and precision manufacturing process, which can greatly improve production efficiency and reduce production costs. At the same time, the plastic mold frame has a longer service life and lower maintenance costs, which can bring more benefits to enterprises.
In the automotive industry, plastic mold frames are widely used in the manufacture of various plastic parts, such as bumpers, dashboards, seats and so on. These components are not only required to look beautiful, but also to have high strength, corrosion resistance and other characteristics. By using plastic mold frames, car manufacturers can significantly improve production efficiency, reduce costs, and launch new models in a short period of time.
In the electronics industry, plastic mold frames are used to manufacture various precision plastic parts, such as mobile phone cases, computer keyboards, and so on. These parts require not only accurate dimensions, but also good insulation and high temperature resistance. By using plastic mold frames, electronics manufacturers can improve production efficiency and shorten time to market while ensuring product quality.
How to check the quality of small diesel generator spray?
Install the injector of the small diesel generator on the tester, shake the joystick 60 to 70 times per minute, and judge the spray quality according to the injection status of the injector, as shown in Figure 5-77.
The specific requirements for small diesel generator injector spray are as follows.
1 The fuel sprayed should be in the form of a mist. The distribution should be fine and uniform. There should not be obvious splash oil droplets and continuous oil droplets, and there should be no local thick and uneven phenomenon.
2 The beginning and the end of the injection should be obvious and should be accompanied by a crisp sound; there should be no drip before and after the injection; after multiple injections, the vicinity of the injection port should be kept dry or slightly moist.
3 spray cone angle: The normal situation is centered on the centerline of the spout, approximately 40 conical spray.
Inspection method: Place a piece of white paper at 100-200mm just below the injector, shake the small diesel generator's joystick to make the injector spray once, measure the diameter D and the distance from the spray on the white paper. Oil collector mouth distance H, spray cone angle: a = 2arctan (D/2H)
If it does not meet the requirements, the injector should be cleaned; if the requirements are still not met after cleaning, the injector should be replaced.