Fish Food Extruder, Floating Pellet Machine, Animal Feed Pellet

Model NO.: FSDLG60, 80 ETC
Condition: New
Applicable Materials Shape: Granular
Usage: Poultry, Clean Energy
Trademark: FS
Specification: casting iron
Origin: China
HS Code: 84793000
Fish food extruder, floating pellet machine, animal feed pellet 

Briefs:
Through years of research and development, we improved some models floating fish feed processing lines, which are fitting for different output and fish breeds. By adjusting the raw materials, temperature and pressure etc. productive technology, our products can produce the floating fish feed with the advantages of novel shapes, abundant nutrition, exquisite texture and slow sinking speed. Our floating fish feed machineries are the ideal choice for all kinds of fishes.
 
Advantage:
  1. To ensure the ripening quality, to assure the nutrition keeping, and reduce the harmful stuff content.
  2. Reliable and durable gearbox, to improve the using life of the machine.
  3. Screw feeder made of stainless steel.
  4. Finished products can be novel & irregular shape, such as different type of pellet, slice shape, fragment shape, or powder.
  5. Frequency conversion and stepless speed regulation feeder, easy operation, and stable running.
  6. Screw, cylinder and pressure ring, made of new developed wear-resisting alloy, more durable.
  7. Stable running, low vibrating and noise.
  8. Compared with others' products, high quality, long using time of spare parts.
 
Specificatioins:
Model Capacity kg/h Screw qtty Screw dia
(mm)		 Screw length
(mm)		 L/D ratio Frequency converter Main motor
(kw)		 Feeder motor
(kw)		 Cutting motor
(mm)		 Size
(mm)
FSDLG60 50-70 1 60 545 9.08:1 1 set 15 0.75 0.75 1420X750X1800
FSDLG80 80-100 1 80 711 8.89:1 1 set 22 0.75 0.75 1500X860X1830
 
 
Fish Food Extruder, Floating Pellet Machine, Animal Feed Pellet

Fish Food Extruder, Floating Pellet Machine, Animal Feed Pellet
Fish Food Extruder, Floating Pellet Machine, Animal Feed Pellet

This machine is mainly composed of rotary part, lifting board, transmission part, supporting part and seal ring. 

1) This machine uses reasonable running parameters, and the coal and electricity consumption is reduced by over 10-15% and the output per machine is improved by over 10-15%.

2) It has high adaptability to the materials so that it can be used for drying all kinds of materials.

3) The product moisture can be controlled according to user requirements

4)the dryer can change operating parameters according to different material properties, with high quality and sufficient heat exchange;

5)the dryer adopts new feeding and discharging devices, putting an end to feeding jam, discontinuity, non-uniform phenomenons of vertical dryer, reducing the load of dust-removing system;

6)the dryer achieves "zero horizontal thrust", greatly reducing the wear of gear wheel;
the dryer adopts self-aligning roller device, wheel and roller ring contact each other in a line, thereby greatly reducing wear and power loss

Hot Air Furnace

Hot Air Furnace,Hot Air Stove,Laboratory Equipment Hot Air Furnace

Changzhou Ruide Drying Engineering Technology Co., Ltd , https://www.rddryer.com