The running-in period of the vehicle is very important. Of course, the concrete pump truck is no exception. Because the chassis used by the concrete pump truck is the truck chassis, it is still necessary to follow the ordinary large-scale diesel trucks when carrying out new vehicle running-in. Carry out the new car. If the new car does not operate well during the running-in period, it will also cause concrete pump trucks to burn oil, lack of power, and high fuel consumption and early wear. It is highly likely that the concrete pump truck will Economic and dynamic performance are reduced, and as a result, the service life will also be reduced. However, because the technology is now well developed, some auto parts manufacturers have achieved very good progress in production technology. Many parts of the vehicle have already undergone a cold run-in period before they leave the factory. Including the engine of the concrete pump truck and other major system components, the running-in period of the new concrete pump truck will also become more and more convenient. Â The run-in distance of concrete pump trucks is generally between 3,000 and 1,500 kilometers. This is basically similar to that of a small car. Some friends may ask, the car trailer was dragged into the 4S shop. , Almost all of the mileages of tens of kilometers before the car owner mentions the car, but before the concrete pump truck's chassis is likely to be assembled in the production factory, it has already traveled thousands of kilometers. Will not be considered to have passed the run-in period? In fact, it is not unreasonable to have such an idea, but there are some concrete pump trucks that haven't experienced much actual road tests before they leave the factory. Â When the concrete pump truck is carrying out the new car running-in period, the most important running-in component is its engine. Then we should notice some problems: The first is to avoid the situation where the throttle is thrown. Then, when controlling the speed of the concrete pump truck, the speed of the engine needs to be well controlled. Finally, it is necessary to avoid that the concrete pump truck hang up at a low speed, and that the engine of the vehicle will be overloaded. Happening. Pulper Machine,Pulping Equipment,Paper Pulp Machine,Pulp Molding Machine DanDong GaoXin Dryer Manufacturing Co.,Ltd , https://www.gaoxinpapermachine.com