The ZKS vacuum feeder uses a vacuum pump to pump air, so that the inlet of the suction nozzle and the whole system are in a certain vacuum state. The powder and particles are sucked into the nozzle along with the outside air to form a material air flow, and then reach the hopper through the suction pipe. Separation of gas and material in the middle. The separated material enters the receiving equipment. Conveying and discharging are accomplished through the continuous opening and closing of the pneumatic three-way valve, and the opening and closing of the pneumatic three-way valve is controlled by the control center. Vacuum Feeder,Vacuum Feeder Conveyor,Pneumatic Conveyor,Vacuum Feeding Machine Changzhou Lead Machinery Technology Co.,Ltd , https://www.leaddryer.com
1. Dehumidifying principle:
 Adopt high performance cellular adsorption wheel,divided into moisture absorption area and regeneration area.When wheel rotates,moisture in the air adsorb in the wheel micro hole, make dry air into the indoor.When the moisture absorption wheel rotates to regeneration area, at this time,regeneration air(warm air) from reverse direction will drive moisture(wet air) absorption of the wheel to outdoor.Wheel repeat moisture absorption and regeneration action, has no influence on air flow,can continuously provide dry air for indoor.
2.Specification: desiccant wheel air drying dehumidifier
Type
MY-350P
MY-450P
MY-550P
Dehumidifying capacity     Kg/h
1.2
2.5
3
Wind capacity         m3/h
250~350
350~450
450~550
Weight             Kg
40
48
50
Dimension           (L*W*H,mm)
660*480*365
770*525*410
810*525*410
Power             KW
2.38
3.3
4.3
3.Environmental conditions:Â industrial dehumidifier with desiccant rotor for Malaysia market
There is no condensed water because of dry dehumidification method,so dry dehumidifier can work at temperature -30°C~60°C.Â
4.Lower humidity:Â industrial dehumidifier for singapore market
Relative humidity can reach less than 1% for some special needs because of adsorption dehumidification.
5.Environmental protection and energy saving:
Reach dehumidification purpose without any cold medium,save energy consumption. Â
6.Application:professional desiccant wheel industrial air dehumidifier
Apply to family,basement,warehouse,port crane tower room,bridges,metal rust, electric control room,brewing,chemistry,chemical engineering,electronics,food, pharmaceutical,film,electronic,food,leather,military equipment,  precision components,seeds,sugar,packaging,dairy products, fertilizer,tea,coffee,hygroscopic powder and other occasion.
Â
Desiccant Wheel Air Drying Dehumidifier
Model NO.: MY series
Type: General
Condition: New
Place of Origin: Jiangsu, China (Mainland)
Voltage: 220V 50Hz
Power(W): 3300
Dimension(L*W*H): 770*525*410
Weight: 48kg
Dehumidifying Capacity: 2.5kg/H
Desiccant Wheel: Import
Delivery: 5 Days
Warranty: 1 Year
Trademark: aobocs
Transport Package: Standard Export Packing
Specification: 450
Origin: Wuxi, Jiangsu, China
HS Code: 8479892000
desiccant wheel air drying dehumidifier