The high-low temperature cycling test chamber air circulation system generally consists of a wind wheel and its drive motor. Commonly used wind turbines have two kinds of axial flow type and multi-wing centrifugal type. The drive motor generally adopts a variable frequency speed control motor to meet the demand of different temperature change rate for air volume. The design goal of the air circulation system is to form a uniform temperature and humidity field in the work chamber of the high-low temperature cycle test chamber and to meet the requirements of the specified temperature change rate. The key technology lies in the formation of a uniform temperature and humidity field air flow tissue design, and good air flow organization design. Bad, directly determine whether the indicators of high-low temperature cycle test can meet international standards. A typical four air circulation ducts are shown below. The inflatable arch sprinkler, children can pass through the curtains, play in the backyard, courtyard and lawn, bringing a lot of summer fun in the hot weather. The inflatable sprinkler is made of high -quality thick PVC materials, which is durable to prevent holes or puncture. Inflatable Arch Sprinkler,Rainbow Sprinkler,Rainbow Sprinkler Arch,Arch Sprinkler P&D Plastic Manufacture Co., Ltd , https://www.jmairfuniture.com
1. Diagram a is suitable for small test chambers. Its structure is simple and it is an air circulation method that is often used in standard constant-temperature and constant-humidity chamber test chambers.
2. Fig. b is applicable to a test chamber with a relatively large volume or a wide temperature range. Its characteristic is that the heaters and chillers on both sides of the fan are required to be placed symmetrically to avoid the uneven temperature and humidity field.
3. Diagram c is applicable to the test chamber with large volume and low temperature impact, and its advantage is that the cooling rate is fast;
4. Figure d, like Figure a, has a simple structure and is suitable for small and medium test chambers. 
The Inflatable Sprinkler Items is easy to use. It needs to be inflated with a gas pump to the sprinkler (excluding), connect it to any garden hose, and then fill the base with water to help it stand stably. Dowry smoothly in the holes. By the way, if it is flipped or over, the water in the base must be full.
The inflatable sprinkler is not only suitable for summer outdoor sprayed toys for children, boys and girls, but also very suitable for children's swimming pools, beach lawn and children's birthday party. Any interesting parents can run with their children under the sprinkler, for a few hours, bringing a lot of fun in hot summer weather.