Permanent Magnet Iron Remover,Iron Permanent Magnet,Diy Permanent Magnet,Electro Permanent Magnet Ningbo YinZhou Haochang Magetic co,LTD , https://www.haoche-magnet.com
1.  Specification of rolling material: 1250×(0.4-0.8)×L,yield strength ≤250MPa
2.  Working speed: 3.0-4.0m/min (take 350mm pitch of waves as example)
3.  Roller steps: 16 steps
4.  Frame of machine: welded with 350H beam steel
5.  Thickness of wallboard: 16mm
6.  Roller material: adopts superior 45# forged steel,with hard chromium plated
7.  Shaft material: adopts superior 45# forged steel, quenching and tempering
8.  Main shaft diameter:¢70 mm
9.  Main motor power: 5.5KW
10. Hydraulic station power: 11KW
11. Hydraulic station pressure: 10 -12Mpa
12. Electric control system: adopts PLC (Panasonic)frequency control
13. Machine size: 7000x1700x1400(mm)
Structure features and compositions
1.Structure features
a. Simple and reasonable structure, beautiful appearance, .Our whole machine adopts profile steel structure and all processed after welding,so it can work stably and has high efficiency.
b. Our machine adopts full automatic accurate fixed length punching and cutting, ends of finished sheets are beautiful and neat, without deformation.
2.Equipment structure
Â
BH-1000-820 Glazed tile roll forming machine is equipped with Feeding device (5 T capacity) transmission, main machine and roller punching after roll forming cutting device hydraulic system, electric control system run out table
1.  Specification of rolling material: 1250×(0.4-0.8)×L,yield strength ≤250MPa
2.  Working speed: 3.0-4.0m/min (take 350mm pitch of waves as example)
3.  Roller steps: 16 steps
4.  Frame of machine: welded with 350H beam steel
5.  Thickness of wallboard: 16mm
6.  Roller material: adopts superior 45# forged steel,with hard chromium plated
7.  Shaft material: adopts superior 45# forged steel, quenching and tempering
8.  Main shaft diameter:¢70 mm
9.  Main motor power: 5.5KW
10. Hydraulic station power: 11KW
11. Hydraulic station pressure: 10 -12Mpa
12. Electric control system: adopts PLC (Panasonic)frequency control
13. Machine size: 7000x1700x1400(mm)
Structure features and compositions
1.Structure features
a. Simple and reasonable structure, beautiful appearance, .Our whole machine adopts profile steel structure and all processed after welding,so it can work stably and has high efficiency.
b. Our machine adopts full automatic accurate fixed length punching and cutting, ends of finished sheets are beautiful and neat, without deformation.
2.Equipment structure
Â
BH-1000-820 Glazed tile roll forming machine is equipped with Feeding device (5 T capacity) transmission, main machine and roller punching after roll forming cutting device hydraulic system, electric control system run out table
BH Glazed Tile Roll Forming Machine for Construction
Model NO.: BH-GT
Origin: Liaoning Province of China
HS Code: 8455229090
Model NO.: BH-GT
Origin: Liaoning Province of China
HS Code: 8455229090
Main parameter