Industrial water chillers/industrial chiller and cooling towers are the most important equipment during plastic molding and processing industry. The air-cooled water chillers and water-cooled water chiillers/Water Chiller are mainly used to reduce the temperature of plastic mould, the machine can reduce the molding cycle time and get a more smooth and perfect plastic products. The cooling towers are always used to cool the oil and hydraulic parts of plastic injection molding achine. Also, the cooling towers are necessary equipment to cooperate with water-cooled chillers, to cool the condenser of chillers.Except them,we also supply Industrial Water Cooling Machine,Water Chilling Machine,industrial water chilling unit. Industrial Water Chiller,Water Cooling Tower,Water Chiller Machine,Industrial Water Cooling Tower,Water Chilling Machine,Industrial Water Cooling Machine,Water Chiller Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com
Pneumatic rubber fenders are used in the various applications,such as ship-to-ship operations, ports and terminals and have proven its quality and performance.Our products are designed to withstand the extreme environmental conditions and we are committed to contribute to the offshore industry by delivering the superior products.
(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Aohai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of Aohai pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.
(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of Aohai sea inflatable fender, its adaptability is much higher than other fender.
Â
(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
Â
Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.
(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
2.Specifications and Measures:
3.Contact Information:
4.Product Picture:
Â
Yokohama Ship Rubber Fender for Sale
Model NO.: Yokohama
Length: 1-12m
Part: Pressure Guage and Spanner
Certificate: CCS BV ABS Gl SGS
Trademark: Aohai
Transport Package: According to Customer Request
Specification: see attached
Origin: China
HS Code: 40169400
1.Product description: