"The quality of Xichai's remanufactured engine is the same as that of the new machine!" This is the evaluation of Xichai remanufactured product users. The remanufactured engine of Wuxi Diesel Engine Factory of FAW Jiefang Automobile Co., Ltd. has entered the market in recent years, and is favored by users due to its advantages of high technology content, strong power, fuel economy, cheapness, and quality of the new machine. Xichai's "remanufacturing" develops rapidly In August 2010, the FAW Xichai remanufacturing project began its project. On May 10, 2011, Wuxi Dahao Power Co., Ltd., a FAW Jiefang Diesel Engine Remanufacturing Base, was put into operation. It is one of the first batch of 24 auto parts remanufacturing pilot units in China. The project has invested over 50 million yuan and covers an area of ​​19,000 square meters. M, can re-manufacture F, L, M three series of diesel engine products, the power coverage of 160 to 400 horsepower, emissions to meet the country two, three national standards, with an annual output of 5,000 Taiwan production capacity. Since the production of the Xichai engine remanufacturing base, the green environmental protection effect of Xichai's remanufactured engines has gradually increased, and the sales volume has steadily increased. In 2012, Xichai remanufactured 37.8% of its engine sales target for over-year sales. In 2013, orders were frequent, and sales volume again set a new record for a single month. Lin Jun, sales manager of FAW Xichai, stated that the market demand for Xichai remanufactured engines has shown a strong trend since entering the New Year. Only 500 users of Xichai remanufactured Aowei machines were ordered by users in Wuyuan County, Bayannaoer City, Inner Mongolia. The current production line of FAW Xichai remanufacturing base is always busy. Xichai's remanufactured engines not only fully demonstrate the superiority of remanufactured products in terms of energy saving and environmental protection and recycling of resources, but also have superiority in terms of product performance, warranty and service standards. The used engine is reprocessed after advanced remanufacturing process. Guilin Guilin Logistics Co., Ltd. Guilin users said that his company has 15 Jiefang J5 cars, all equipped with Xichai Aowei engines, the previous year due to a car accident scrapped a Xichai Aowei engine, replaced on a "Xichai remanufacturing "Engine", the result is the same as the new machine. So, he took the initiative to find his second order. The person in charge of the Xichai remanufacturing base stated that the FAW Xichai remanufacturing base closely relied on a comprehensive marketing service network consisting of 1,500 service stations of Xichai to recycle old machines and sell remanufactured engines, and provide three-pack services, using Xichai. Customers of remanufactured engines can enjoy the same three-pack service as the new machine. Xichai's remanufactured engines have attracted a large number of hardcore users with excellent quality and the same three-pack period and service standards as the new machine. At the same time, brand awareness has also been improved. [next] Green product popular market According to the person in charge of the Xichai remanufacturing base, Xichai's remanufactured engines are capable of saving energy by 60%, saving materials by 70%, and saving material costs by approximately 50% compared with newly manufactured products while ensuring the same quality and performance. No solid waste will be produced, and the emission of air pollutants will be reduced by more than 80%. It is understood that the main processes of Xichai remanufacture include dismantling, surface repair, machining and assembly. According to the technical personnel, after the old engine has been replaced and recovered, and before the dismantling, the engine needs to be pre-cleaned, ie, degreasing and rust removal. The washing process of the Xichai remanufacturing production base adopts mature European and American water jet cleaning and shot blasting. Machines, Pills, and other pyrolysis systems reduce waste pollution caused by cleaning by 80%, while air emissions reach European standards. In the cleaning area of ​​the workshop, there is indeed no oil and dust on the ground. After a thorough cleaning process, the appearance of parts and components is shining. Xichai's remanufacture surface repair is the integration of mature surface engineering technology into remanufacturing technology, high-tech transformation of used products, high quality, high efficiency, energy saving, material saving and environmental protection. Only qualified reusable parts can be reinstalled on the original engine, and previously tested parts that failed to pass will be replaced with new ones. The entire assembly process is performed according to the new machine assembly requirements. At present, Xichai remanufacturing base has reached four leading positions: First, it is advanced in equipment, equipped with American Rottler Company, Danish AMC company's mature remanufacturing special equipment, Atlas electric tightening machine, and secondly, it is technologically advanced and adopts American AEC high-pressure water. Jet cleaning equipment and Guspro's high-temperature roasting cleaning technology in Canada, digesting and absorbing Beijing Armored Forces Engineering Institute equipment remanufacturing technology, National Defense Science and Technology Key Laboratory nano brush plating and high-speed arc spraying additive remanufacturing technology; Third, leading parts, replacement of new parts All of them are genuine engine parts provided by Xichai's supporting systems and are completely interchangeable with those of similar models. The fourth is the leading standard. It fully implements the assembly standards of the original new machine, and it is completed according to the new machine's quality inspection standards and its technical specifications. Machine run-in, commissioning test. Xichai's remanufacturing base interprets Xichai's circular economy model of "resources-products-waste products-remanufacturing products" with tangible modern remanufacturing technology and facilities. Xichai remanufactured the engine with the same quality, service, and lower price than new products. Rubber Clay,Clay Moulding,Edible Plasticine,Modeling Clay Product Ningbo Foil Mori Import and Export Co., Ltd. , https://www.foilmori.com