An excavator hydraulic sweeper is a type of attachment that can be added to an excavator machine. It is used to sweep and clean various surfaces, such as roads, parking lots, and construction sites. The hydraulic sweeper is powered by the excavator's hydraulic system and consists of a rotating brush or broom that sweeps debris into a collection bin or hopper. The attachment can be adjusted to different angles and heights to accommodate different surfaces and debris types. It is commonly used in construction, landscaping, and municipal maintenance applications. Hydraulic Rotary Broom,excavator sweeper broom,Hydraulic Road Sweeper,Hydraulic Sweeper Brush CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcatsu.com
Water hammer pump installation method
Select the water resources, water flow, and there is a certain drop (1.5m above) of the stream, outside the dam or canal as a water hammer installation. The pump must be installed on a sturdy concrete foundation, bolted firmly, and a dam must be built in front of the pump drain valve. A sump of considerable capacity and height is built at the top of the pump and connected to the pump by the inlet pipe The length of the water pipe should be 8 times the drop, the pipe should be straight, not allowed to bend, water pipe head and tail to be anti-seismic pier. Pump outlet pipe to install the valve for operation, the outlet pipe must be higher than the highest point of the pressure tank, and try to reduce the elbow, in order to avoid increased resistance and reduce flow. Pump and the pipe joints should not leak. Wherever conditions permit, a reservoir can also be built on the outlet pipe.