When preparing a mesh for a Multi-Component Molding (MCM) model, Moldex3D Designer BLM supports the analysis of using non-matching mesh topology at the contact face between the part and the part insert, which is also known as the “Auto-Grid†feature. This feature helps users attain continuous analysis results across the whole model without manually adjusting/matching the mesh in the contact-face area. As a result, users can reduce a great deal of time and efforts spent on completing the meshing process. The following article will show a step-by-step process of generating an Auto-Grid mesh. Step 1. Check Switch to Auto-Grid mesh when cooling system solid mesh generation fails, under Model properties in the Options toolbar. In this way, Designer BLM will automatically create an auto-grid mesh if it detects any non-matching mesh elements. Note: This function can prevent failures in generating cooling system solid meshes due to non-matching mesh topology. Step 2. Next, complete the solid mesh generation for the runner and cooling systems, following the general procedure for mesh generation in Designer BLM. Note: Using Auto-Grid feature will keep the non-matching mesh elements, but it will automatically detect and record the mesh elements that show a significant size difference in the part and the part insert contact-face area in Surface Mesh Information. Note: If the size gap is severe, as shown in the example below, the Downsize wizard tool will appear and fix the issue automatically. Used Road Machinery,Second Hand Roller,Single Steel Roller,Used Roller XCMG E-Commerce Inc. , https://www.usedmachinemkt.com
