Zowell RSEW multi-directional forklift is a
material handling equipment designed for long and bulky material handling and
stacking. Its unique design covers the advantages of common forklifts and stackers
as well as 3-way VNA trucks. With three omni-directional wheels, it can drive in
multiple directions such as parallel moving and oblique moving, so as able to
maneuver smaller aisles and maximize your warehouse storage safely.
As a company with experience on narrow
aisle electric forklifts for more than 15 years, Zowell always focuses on
professional warehouse solutions and customer experience. RSEW series is featured with electric power featured with low noise and no emission, and
can be equipped with lithium battery with convenient maintenance and longer
service life. The load wheels are equipped with the
five-stage steering deceleration and small control current, which enables the
steering angle more precise and controllable, effectively extend the service
life of the steering motor. From the aspect of security, Zowell
multi-directional forklift is equipped with steering wheels display system and
barking system to maximize safety.
In general, the man-machine engineering
simulation design makes RSEW easier to operate, more accurate in control,
providing a perfect solution for long materials handling and stacking. Meanwhile,
we provide various types according to load capacity and lift height as well as
additional options such as fork positioner and AGV modification to meet your practical
needs. Please refer to the parameters attached on our products or ask our staff
for help in any case.
Electric Hand Pallet Jack,Standing Pallet Jack,Electric High Lift Pallet Truck,Motorized Pallet Truck Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com
rock drill jack hammer Yt23 Air-Leg Rock Drill
Instruction
The rock drill of YT23 is a kind of high efficiency air leg rock drill machinery. It is mainly used for blasting holes and other drilling works in a quarries, railway construction, water conservancy construction and defence project facility.
When it is matched with the Model FY200A Oil reservior and Model FT160A or FT160B Air-leg, it can perform wet drilling and blast holes from different and angles.
Model No.
YT23(7655)Â Airleg rock drillÂ
weight
24kg
air consumption
80L/S
impact frequency
36Hz
air pressure
0.64Mpa
Maintenance
. Notice
1. Dismantle new machine and clean parts before using new machine, when assembling machine, oil parts. then operate and check machine before using it, but the time is about 10minutes and air pressure is low (0.3Mpa for better).
2. The air pressure should be kept at 0.5-0.63 MPa.(measure in rubber tube), if the air pressure is too high, it will damage parts.if the air pressure is too low,it will affect the speed of drilling and machine normal working
3. Before using machine, blow off dirty to protect parts. inspect the screw thread whether is tight and operating handle whether is free to move, ensure machine operate normally.
4. Oil lubricating oil into oil lubricator before using machine, oil oil reservoir every other hour.Do not operate machine without lubricating oil.
5. Before using machine, increase holding power,while operate machine increasingly. Donot operate machine at the max thrust or should not idle machine too long, it will damage parts.
6. Diamantle water pipe and operate machine after blasting holes. It can blow off the rest moisture and protect parts away from rusting .
7,The rock drill is centre water-injection drilling. Do not operate without water and dismantle
water needle.
8. Tighten two side bolt nuts to protect parts and tighten air pipe to aviod causing injure
9. If machine should store for a long time.diamantle machine first , oil and seal , then placed a dry place.
. Safety
1. Ensure that technical safe practices are employed.
2. Pay attention to the position of steel wire ring clamp.
3. Check steel wire ring clamp whether or not abrase, if so, change another at once.
4. Do not allow ues low burning point and easy explosion lubricating oil.
