Polyester Overlay PTFE Membrane Filter Bag (Air Filter)

Model NO.: FB-PE-005
Filtration Grade: Medium Filter
Filter Bag Sectional Shape: Round Bag
Filter Bag Environment: Temperature
Cartridge Installation: Flange Mounting
Top Design: Carbon Steel or Ss Sanpband
Bottom Design: Disc
Trademark: Air Filtration
Transport Package: Carton Or As Your Requirements
Specification: as customer requirement
Origin: China
Material: Polyester overlay PTFE Membrane Needle Felt
Weight: 450GSM~550GSM
Diameter: Φ 130, Φ 138, Φ 152, Φ 158 etc. We make it as your requirements.
Length: 1000mm~8000mm. We make is as your requirements.
Making method: Our bags are sewn with 3 - needle chain stitch to ensure seam integrity. Top constructions consist of snap band, flange top, ring top, soft cuffs or raw edge. Bottom removal bags are constructed with a raw top or soft cuff. Top and bottom removal bag bottoms have disc bottoms that are sewn using an overlock (surge) stitch or lock stitch. A wear strip or custom skirts is attached to the bottom portion of the bag to prevent premature wear from bag-to-bag and bag-to-cage abrasion.
Raw materials
of the filter material
Temperature
Property of the filter material
 & the suitable industrial conditions
Application field and
industrial condition
Polypropylene (PP)
900C
Suitable for the condition with continuous working temperature less than 900C & short time temperature less than 1000C. The oxidation resistance of the material is ordinary. Suitable PH range is 1to 14. The resistance of hydrolysis of the material is good.
Suitable for the dust collection of sugar production, chemical fertilizer plants, electroplating, pesticide plant, etc
polyacrylonitrile(AC)
1100C
Suitable for the condition with continuous working temperature less than 1100C & short time temperature less than 1150C. The oxidation resistance of the material is ordinary. Suitable PH range is 6 to 13.
Relative humidity<5%
Suitable for the dust collection of detergent production, pulverized coal plant, etc
homopolyacrylonitrile(DT)
1250C
Suitable for the condition with continuous working temperature less than 1250C & short time temperature less than 1400C. The oxidation resistance of the material is ordinary. Suitable PH range is 3 to 11
Relative humidity<30%
Suitable for the dust collection of detergent production, garbage incineration, asphalt, spray dryer, coal mill, power plant, etc.
Polyester (PE)
1500C
Suitable for the condition with continuous working temperature less than 1300C & short time temperature less than 1500C. The oxidation resistance of the material is good.
The acid-base resistance is ordinary. Suitable PH range is 4 to 12.
Relative humidity<4%
The expected lifetime depends on the moisture content of the flue gas when the working temperature is high.
Suitable for the dust collection of mine, lime cement production, raw cement, grinding machine, packaging and other process, continuous casting and sintering, ironmaking processes of Iron and steel industry , alumina conveying, electrolytic aluminum production, non-ferrous metal smelting plant, wood processing, food processing, pharmaceutical and other industries
polyphenylene sulfide
(PPS)
1600C
Suitable for the condition with continuous working temperature less than 1600C & short time temperature less than 2000C. The oxidation resistance of the material is not good. The resistance to acid-base is good. Suitable PH range is 1 to 14
Relative humidity>30%
Suitable for the dust collection of flue gas of coal-fired boilers, garbage incineration, metal smelting, chemical industry , etc.
polyamide (NO)
2000C
Suitable for the condition with continuous working temperature less than 2040C & short time temperature less than 2400C. The oxidation resistance of the material is ordinary.
PH range is 4 to 12.
Relative humidity<10%
The performance of the material depends on the moisture content of the flue gas when the working temperature is high.
Suitable for the dust collection of flue gas of asphalt-mixing, non-ferrous metal smelting, ceramics, glass, kiln head of cement industry (grate cooler), steel blast, etc.
polyimide(PI/P84)
2200C
Suitable for the condition with continuous working temperature less than 2200C & short time temperature less than 2600C. The oxidation resistance of the material is ordinary.
PH range is 3 to 13.
Relative humidity<25%
Suitable for the dust collection of  the corrosive flue gas of Chemical plant, metal melting, garbage incineration, cement preheater and coal boiler, etc.
polyfluortetraethylene(PTFE)
2500C
Suitable for the condition with continuous working temperature less than 2500C & short time temperature less than 2800C. The material have good resistance for all the chemical corrosion
PH range is 1 to 14
Relative humidity>30%
The material has good ash removal performance.
Suitable for the dust collection of  the highly temperature and high corrosive flue gas of Chemical industry, coal boiler, garbage incineration, non-ferrous metal smelting plant, etc.
Fiberglass (FG)
2600C
Suitable for the condition with continuous working temperature less than 2600C & short time temperature less than 2800C. The oxidation resistance of the material is ordinary. Suitable PH range is 4 to 9
Relative humidity55%
Suitable for the dust collection of  the highly temperature flue gas of, Cement production, coal boiler, garbage incineration, steelmaking furnace, blast furnace gas production, the ferroalloy furnace, etc

Light Show Laser

CNI provides OEM DPSS and diode lasers for light show. Single wavelength in green, blue, yellow, red and multi-wavelength RGB lasers are optional. These lasers are designed with high reliability and ultra compact dimensions, can be perfectly integrated into customers' projectors.CNI can provide supporting photosynthetic perfect system for customers, including engineering drawings, photosynthesis, Laser and other necessary accessories. According to customer demand, to provide high power red, green, blue and other monochromatic laser light combination system. CNI can offer RGB mix solution for customers, you can make full color show lasers at any output power up to 50 watts.

â—†Green Laser

532nm

â–  OEM-I-532 / 1~5W

â–  OEM-F-532 / 0.3~3W

â–  OEM-N-532 / 3~5W

â–  OEM-W-532 / 6~18W

â–  OEM-D-532 / 20~30W


520nm

â–  OEM-F-520 / 1~800mW

â–  OEM-D-520 / 1~3.5W

â–  OEM-GD-520 / 3.5~5W

â–  OEM-XD-520 / 7~8W

â–  OEM-KD-520 / 6~10W

â–  OEM-BD-520 / 11~20W





â–  MGL-H-532 / 0.5~1.5W

â–  MGL-F-532 / 1.5~2.5W

â–  MGL-D-532 / 20~30W


â—†Blue Laser

447nm

â–  OEM-F-447 / 1~3.5W

â–  OEM-D-447 / 4~8W

â–  OEM-GD-447 / 9~16W

â–  OEM-XD-114 / 17~28W

462nm

â–  OEM-GD-462 / 16W

â–  OEM-KD-462 / 20~30W







455nm

â–  OEM-KD-455 / 30~36W

â–  OEM-BD-455 / 40~50W

465nm

â–  OEM-F-465 / 1~3W



â—†Red Laser
 â—†Yellow Laser



635nm

â–  OEM-D-635 / 1~2W

â–  OEM-GD-635 / 3~6W

â–  OEM-XD-635/ 7~11W

â–  OEM-BD-635 / 15~20W

â–  OEM-TD-635 / 25~30W

589nm

â– MGL-F-589 / 1~300mW

â–  MGL-N-589 / 300~800mW

â–  MGL-W-589 / 800~4500mW




â—†RGB Laser (Multi- wavelength Laser)
RGB-XD 635nm & 520nm & 455nm



635nm & 520nm & 450nm / 10~12W RGB-KD / 13W

RGB-BD / 15~16W/ 20W
RGB-GD RGB-FD / 35W
635nm & 520nm & 447nm

4W/ 6W/ 8W




Lasers for Light Show,Stage Laser Light Show,Light Show Blue Laser,Wedding Light Show Laser

Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.cniopticsqm.com