Oil truck purchase and use precautions

The oil tanker belongs to the dangerous goods transporter and must pay attention to the safe operation steps in use. Many drivers' friends do not operate strictly according to the operating instructions in the process of driving the oil tanker. Many dangerous accidents occur, so I think it is necessary here. Tell everyone about the need to pay attention to the use and purchase of the tanker.
The safety of the oil tanker is very important. In the oil season, many informal schools use the car to start refueling. A series of safety hazards spawned cannot be ignored. In order to enhance safety awareness, it provides advice for novices to transport oil and provides reference for all oil tankers:
First: oil truck or tanker purchase must be regular factory. Steel must be GB steel. Nowadays, the popular processing technology is overall welding, with less quilting. The state body should not exceed the standard, and the excessive cans (especially the ultra-high ones) need to be resisted so as to avoid the risk of overturning during use.
Second: The vehicle must be factory-issued by the manufacturer to provide certificate of conformity, inspection report, and inspection report. Qualified enterprises usually have inspection equipment and flaw detection qualifications. Like chemical vehicles, oil tankers need to apply for a transportation permit, and the review process is more stringent than other vehicles.
 
Thirdly, the oil in the oil tank is transported or shaken in the tank and the inner wall of the tank. The friction rises and the flammability coefficient increases. We often see trucks with dangerous goods. A diversion will be dragged under the rear chassis. The metal chain to discharge static electricity reduces the security risks.
Fourth: The tanker truck should be equipped with a special fire extinguisher and should be installed with a tow subway chain and a lightning rod. When driving, the tow subway chain should be in contact with the ground; when refueling or draining, it must be inserted into the damp ground.
Fifth: The oil tank filling hole should be tightly sealed. The oil discharge valve and the oil discharge pipe should be free of leakage. The tank air vent should be unblocked. The oil pump oil filter should be cleaned frequently. The oil supply hose should be used immediately after it is used up. Joint cover, no dirt can enter.
     
Sixth: The gasifier and exhaust pipe of the internal combustion engine must not be tempered. The exhaust pipe should be installed in front of the vehicle.

Hose Clip

Ningbo Brightfast Machinery Industry Trade Co.,Ltd , https://www.brightfastener.com