Nanjing Sanpu New Rotary Sulphur Granulator Capacity Increases Significantly

Nanjing Sanpu Granulation Equipment Co., Ltd. has developed a new type of large-capacity sulfur granulator, rotary drum type sulfur granulator, which has sold nearly 30 sets since it was put on the market. After a long period of application inspection and further technical improvement, the granulator has now formed a 15/20/25/30 tons/hour specification equipment product, and the maximum single-machine capacity is 5 times that of the steel belt granulator.

The steel strip type sulfur granulator has been applied to the sulfur recovery process for nearly 20 years, and the processing capacity of a single unit is small. With the rapid growth of China's refining capacity, the new project is basically 10 million tons. Due to the large amount of imported crude oil, the sulfur content is relatively high, and the sulfur recovery capacity of each refinery reaches 200,000 to 300,000 tons/year. Refining companies urgently need a single sulfur granulator with a significant increase in production capacity to meet the demand for plant sulfur recovery. Nanjing Sanpu sharply captured this market information. It has developed a new type of large-capacity rotary drum granulator for three years. Its maximum single-product capacity is five times that of the steel belt granulator.

Compared with steel belt granulator, rotary drum granulator does not need to replace large wearing parts, and the loss of ton product equipment is only 1/20 of the former, and the continuous long-term running time is longer. If the equipment is operated at 8,000 hours/year, a steel belt granulator needs to be replaced in 1~2 years at a cost of 400,000 to 450,000 yuan. However, the annual cost of equipment and spare parts for the rotary drum granulator is only It is 20,000 yuan/year. At the same time, the main part of the drum granulator is only 1/3 of the floor area of ​​the steel belt granulator, which can save the company more investment in infrastructure and other infrastructure. In addition, the selling price of rotary granulator is only 1/2 of imported equipment of the same type in foreign countries, which can save a lot of money for the company.

Aluminum Plate

Aluminum plate refers to the aluminum material with a thickness of more than 0.2mm to less than 500mm, a width of more than 200 mm, and a length of less than 16m, which is called aluminum plate or Aluminum Sheet. Aluminum plate with a thickness of less than 0.2mm is called aluminum material, and aluminum plate with a width of less than 200 mm is called row material or strip material (of course, with the progress of large equipment, there are more aluminum plates with a maximum width of 600 mm).
Aluminum plate refers to the rectangular plate rolled by aluminum ingot, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate and patterned aluminum plate.

Aluminum plate, aluminum rolling plate, Extrusion Aluminum plate for heat exchanger

Trumony Aluminum Limited , https://www.szaluminumpipe.com