Multistage Pipeline Pump Vertical Type

Model NO.: DG
Impeller: Semi-Open
Usage: Pump
Name: Vertical Multistage Pipeline Pume
Certification: CE
Trademark: EAST
Transport Package: Fumigation Wooden Case
Specification: CE
Origin: Shanghai, China
HS Code: 841370999
Model NO.: DG
Impeller: Semi-Open
Usage: Pump
Name: Vertical Multistage Pipeline Pume
Certification: CE
Trademark: EAST
Transport Package: Fumigation Wooden Case
Specification: CE
Origin: Shanghai, China
HS Code: 841370999
Good quality DG type boiler feed pump.


Operating conditions and range
 
 
Good quality DG type boiler feed pump
Model DG
DN(flange) 80~800mm
Capacity 3.75~500m³/h, with 2950RPM, 1450RPM, 980RPM
Head 49~680m
Permitting working pressure 2.5MPa 
Medium Temperature -20°C ~ 105°C
Material Cast iron-HT200, HT250; SS304, SS316, SS316L, Duplex SS
Partical  80mg/l
Motor 380V, 415V, 660V; IP54, IP55; 50Hz, 60Hz
Shaft Cast steel, 2Cr13
Casing and cover Cast iron, Nudular cast iron, Cast steel
Impeller Cast iron, Bronze, stainless steel
Mouth seal Cast iron, nudular cast iron, bronze, stianless steel. 
Shaft seal Mechanical seal or packing seal
Bearing Closed grease lubricated roller bearing(SKF, NTN) NSK thrust 
and roll bearing
Flange standard ASME, DIN, GB
Seal by Burgmann mechanical seal or gland packing
Quality control system ISO9001: 2000, ISO14001, OHSAS18001, ISO2548, GB/T3216, 
GB/T5657, GB19762-2005
Main Application It is used to transport other liquid whose physical and chemical characteristic are similar to water, also can transoprt hot water, oil, corrosive or contain grain medium through change the material of pump passing parts, seal types and adding cooling system.

Summarize
DG type boiler feed pump have features of high efficiency, wide performance scope, operating safely and smoothly, lower noise and long working life and convenient to maintain, etc. The product carry out the standard of GB/T5657 .

Features
High efficiency, convenient to instal and maintain, adopts high efficiency and energy saving water power model.
It can be used for long time: the shaft is whole sealing structure, that made it not contact with medium. it would not be rusted, so the using life is longer.



Model defined
  DG       __1__   --    __2__     x    __3___   

Boiler feed pump
                       1. rated capacity (m³/h)
                                2. rated head of pump single stage
                                                              3. stage of pump
                                                                                                  
 
Pump Type Stage Capacity Head Speed Power Efficiency NPSHR Total weight
m³/h m r/min kW % m kg
DG85-45 3 55 153 2950 36.38 63 3.2 224
85 135 43.3 72 4.2
100 117 45.52 70 5.2

Item of service
Technical training Equipment evaluation
Installation and debugging Troubleshoot
Maintenance Update and improvement
Commitment to the service
1. After signing the contract, send engineer for assisting installation and debugging. 
2. One-year warranty. Provide technical support free all-life of the products. 
3. Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected. 
4. Hot-line of service is available in 24h, responded in 8h. 400 1666 099

Multistage Pipeline Pump Vertical Type
Multistage Pipeline Pump Vertical Type
Multistage Pipeline Pump Vertical Type
  Good quality DG type boiler feed pump.


Operating conditions and range
 
 
Good quality DG type boiler feed pump
Model DG
DN(flange) 80~800mm
Capacity 3.75~500m³/h, with 2950RPM, 1450RPM, 980RPM
Head 49~680m
Permitting working pressure 2.5MPa 
Medium Temperature -20°C ~ 105°C
Material Cast iron-HT200, HT250; SS304, SS316, SS316L, Duplex SS
Partical  80mg/l
Motor 380V, 415V, 660V; IP54, IP55; 50Hz, 60Hz
Shaft Cast steel, 2Cr13
Casing and cover Cast iron, Nudular cast iron, Cast steel
Impeller Cast iron, Bronze, stainless steel
Mouth seal Cast iron, nudular cast iron, bronze, stianless steel. 
Shaft seal Mechanical seal or packing seal
Bearing Closed grease lubricated roller bearing(SKF, NTN) NSK thrust 
and roll bearing
Flange standard ASME, DIN, GB
Seal by Burgmann mechanical seal or gland packing
Quality control system ISO9001: 2000, ISO14001, OHSAS18001, ISO2548, GB/T3216, 
GB/T5657, GB19762-2005
Main Application It is used to transport other liquid whose physical and chemical characteristic are similar to water, also can transoprt hot water, oil, corrosive or contain grain medium through change the material of pump passing parts, seal types and adding cooling system.

Summarize
DG type boiler feed pump have features of high efficiency, wide performance scope, operating safely and smoothly, lower noise and long working life and convenient to maintain, etc. The product carry out the standard of GB/T5657 .

Features
High efficiency, convenient to instal and maintain, adopts high efficiency and energy saving water power model.
It can be used for long time: the shaft is whole sealing structure, that made it not contact with medium. it would not be rusted, so the using life is longer.



Model defined
  DG       __1__   --    __2__     x    __3___   

Boiler feed pump
                       1. rated capacity (m³/h)
                                2. rated head of pump single stage
                                                              3. stage of pump
                                                                                                  
 
Pump Type Stage Capacity Head Speed Power Efficiency NPSHR Total weight
m³/h m r/min kW % m kg
DG85-45 3 55 153 2950 36.38 63 3.2 224
85 135 43.3 72 4.2
100 117 45.52 70 5.2

Item of service
Technical training Equipment evaluation
Installation and debugging Troubleshoot
Maintenance Update and improvement
Commitment to the service
1. After signing the contract, send engineer for assisting installation and debugging. 
2. One-year warranty. Provide technical support free all-life of the products. 
3. Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected. 
4. Hot-line of service is available in 24h, responded in 8h. 400 1666 099

Multistage Pipeline Pump Vertical Type
Multistage Pipeline Pump Vertical Type
Multistage Pipeline Pump Vertical Type
 

Selective Laser Sintering - Sls

Stereo Light Curing Molding - Sla

It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.

Sls Printing

Selective Laser Sintering - Sls,Sls 3D Printing Service,Laser Sintering 3D Printing,Selective Laser Printing

Ningbo Rongna Technology Co.,Ltd , https://www.service-machining.com