Marine Rubber Ship Slavage Airbags for Salvage and Floating (HT5/1.5)

Model NO.: HT5/1.5
Layers: Form 3-9 or More
Working Pressure: Depends on Different Size
Guaranteed: 12 Months
Technology: High Pressure Anti-Explosive
Accessory: Pressure Gauge,Joint,Valves,Pulling Rings
Weight: Depends on Different Size
Usage: Ship Salvage, Launching and Landing
Inflatable Bags Package: Pallet
Trademark: Hantian
Transport Package: Pallet
Specification: CCS
Origin: Zhejiang, China
HS Code: 4016950000
Marine Rubber Ship Slavage Airbags for Salvage and Floating (HT5/1.5)
Ship slavage airbags Description

Marine ship slavage airbags
1.Product Introduction
Marine ship rubber airbags also known as rubber airbag, ship launching airbag, ship salvage airbag, inflatable airbag, ship lifting bag, air balloon, made by rubber & multi-layer of rubber-dipped tyre fabric.
Marine inflatable bags meet the CB/T3837 and CB/T 3795 requirements
Marine inflatable bags are widely used in launching and landing ship/ boat/vessel, lifting and moving heavy goods, salvaging stranded boats.Marine airbags are very popular with shipyard, ship owner, and marine supplies company now.
Marine Rubber Ship Slavage Airbags for Salvage and Floating (HT5/1.5)
Ship slavage airbags characteristics:
1.High strength:The polyamide cord thread for airbag is produced with high tension reinforced fiber.A cord thread has the strength more than 320N, and the cord fabric has consistent and reliable quality.Our company developed and manufactured high strength airbags with the higher strength steel wires and aramid fiber as skeleton materials on customers' request.
2.Wear resistance and anti-aging:An airbag often works in extreme conditions, for example, it is soaked in sea water, insolated in the direct sunlight and rolled in sand.Our marine is produced with natural rubber in a reasonable formula.The practice proves that airbag has high wear resistance and anti-aging ability, and the service life as long as 8-10 years.
3.Good air tightness:Our Company use high quality rubber, as material and the advanced manufacture process to assure that our products have good air tightness, especially air tightness of the assisted floated airbag.Our airbag can keep its pressure 24 hours with work pressure, the pressure will reduce less than 3%.
4.Safety and reliability:Giyo marine airbag with the optimized structure design has the safety coefficient of 4-6 times, namely that its bursting pressure is 4-6 times its work pressure.Our airbag has a multi-channel airbag mouth to enhance the strength and air tightness between the airbag body and mouth.
Marine Rubber Ship Slavage Airbags for Salvage and Floating (HT5/1.5)

Type and normal size of GiYo marine airbag
Type Number of fortifying fiber layers Demeter range Normal lengths Main usage
HT-3 3 D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m 5-18m Suitable for the small ships up to slipway and launching as well as transportation of objects
HT-4 4 D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m 5-18m Suitable for the larger ships up to slipway and launching as well as transportation of objects
HT-5 5 D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m 5-18m Suitable for the lager and medium size ships up to slipway and launching as well as transportation of objects
HT-6 6 D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m 5-18m Suitable for the size ships up to slipway and launching as well as transportation of objects ( according to the vessel's actual size)
HT-7 7 D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m 5-18m
HT-8 8 D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m 5-18m
Note:Other sizes are also available
 
Parameters and performance of  the marine airbag
Type Safety working pressure
D=0.8m D=1.0m D=1.2m D=1.5m D=1.8m D=2.0m
HT-3 0.13Mpa 0.10Mpa 0.09Mpa 0.07Mpa 0.06Mpa 0.05Mpa
HT-4 0.17Mpa 0.13Mpa 0.11Mpa 0.09Mpa 0.08Mpa 0.07Mpa
HT-5 0.21Mpa 0.17Mpa 0.14Mpa 0.11Mpa 0.09Mpa 0.08Mpa
HT-6 0.25Mpa 0.20Mpa 0.17Mpa 0.13Mpa 0.11Mpa 0.10Mpa
HT-7 0.30Mpa 0.25Mpa 0.20Mpa 0.15Mpa 0.13Mpa 0.12Mpa
HT-8 0.33Mpa 0.28Mpa 0.23Mpa 0.18Mpa 0.15Mpa 0.14Mpa
Marine Rubber Ship Slavage Airbags for Salvage and Floating (HT5/1.5)
To recommend you best marine laucing airbags size - please answer the following questions:
1.Type of vessel?
2.LOA (length) of ship?
3.Width of vessel?
4.Vessel's actual launched weight (gravity weight)/weight without cargo?
5.What is the vessel's DWT?
6.Type of ground ship is built on?(Dirt, concrete, etc.)
7.Depth in meters of the water where the ship first enters the water?
8.What's the angle degree of slipway?(Land, not under water)
9.Please provide the low/high tide schedule at site.
10.The working height?(The block stand height under the vessel)
11.Distance from bottom of propeller to the water level?
12.Distance from back of vessel (in dry dock) to the water entry point?
*If possible, please provide photos of the launch area
Marine Rubber Ship Slavage Airbags for Salvage and Floating (HT5/1.5)

Fiber Coupled Laser

Fiber Coupled Lasers

Fiber Coupled Laser Module

All series CNI Laser modules can be fiber coupled with different core diameter MM fiber or SM fiber. You have to refer to the detailed specs of each laser modules (such as power, stability, noise, size, etc) to decide which one is suitable for your application. We would like to do the coupling job for you.

fiber coupled laser module

Fiber Coupled Integrated Electronics Laser System


The FC series (Fiber Coupled Laser System) integrates Laser Diode, laser cavity, fiber coupled optics, laser power supply, LD current and crystal temperature control into ONE box. The power is available for 1mW-100W with different dimensions. The characteristics of compact design and convenient functions make it very suitable for pumping, scientific research, industrial and medical applications.

fiber coupled laser system
fiber coupled laser high power
high power laser system

FC-X

Low Power Levels

FC-W-A/ B

50W

FC-W-H

50-100W


Multi-wavelength Fiber Coupled Laser

Special offer multi-wavelength fiber coupled laser system are designed with integrated electronics and easy operation. 2~6 wavelengths can be combined into one box. USB or RS232 connector is optional. Wavelengths are available for UV-Visible-IR range, lasers include diode and DPSS lasers. The multi-wavelength lasers are widely used for medical, biomedical, and industrial application, etc.
multi wavelength laser

Even Beam Fiber Coupling

CNI can supply the even beam distribution of laser modules and laser systems, features a flat beam profile with different wavelengths. They are suitable for the fields of medical treatment, ultraviolet curing, fluorescent detection, criminal investigation and scientific research.

fiber coupled laser beam
Square Even Beam
Round Even Beam Square Even Beam


Accessories

fiber coupled
fiber collimator

Fiber

Fiber Collimator

Single-mode fiber with core diameter 4-9 μm

Multi-mode fiber with core diameter 50-1000 μm

Used to collimate the beam at the end of fiber

Focus adjustable collimator optional

Multiwavelength Laser,Fiber Coupled,Red Fiber Coupled Led, Multi-Wavelength Laser

Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.lasersciences.com