LS screw conveyor

    LS-type screw conveyor is equivalent to ISO1050-75 standard, and it is designed and manufactured in accordance with professional standards of ZBJ81005.1~2-88 "LS Screw Conveyor". LS screw conveyor diameter from 100mm ~ 1250mm, a total of 12 kinds of specifications, divided into single drive and dual drive two forms, single drive screw machine up to 40m in length (extra large 30m), dual drive screw machine with medium break Open shaft structure, large length up to 80m (extra large 60m), spiral machine length every 0.5m, can be selected according to need, spiral machine head bearing, rear bearing placed outside the housing to reduce dust on the bearing chamber Intrusion increases the service life of key parts of the screw machine. The middle suspension bearing adopts two structures that are interchangeable in rolling and sliding, with low resistance, strong sealing, and good wear resistance. Bearings for sliding bearings are available in powder metallurgy, nylon and babbitt alloys for users to choose according to different occasions. Hanging bearing machine outside the set of oil cup, easy to concentrate lubrication. The layout of the inlet and outlet is flexible, and an electric discharge port is added to facilitate automatic control. The speed alarm device can also be configured according to user requirements.

     LS screw conveyor has been widely used in various sectors of the national economy, such as building materials, metallurgy, chemical industry, electric power, coal, machinery, light industry, food, and food industries. It is suitable for conveying powdery, granular, and small bulk materials, such as Cement, pulverized coal, foodstuff, fertilizer, ash, sand, coke, etc. It is not suitable to convey materials which are liable to degenerate, sticky, and easy to agglomerate. The operating temperature of LS screw conveyor is usually -20～40°C, and the temperature of conveying material. Generally -20～80°C, LS screw conveyor is suitable for horizontal and small angles, and the inclination angle is not more than 15°. If the angle of inclination is too large, please use GX series screw conveyor, or contact our technical department for separate design.