with me working equipment The hook on the bucket has been welded before leaving the factory. Never worry that your welding may have an adverse effect on the strength of the bucket back. You can safely carry out the lifting work. working equipment The pipe support of the breaker on the stick has also been welded before leaving the factory. It is more convenient to install the breaker. Of course, the spare valve standard is a must! working equipment The boom work light has been protected. It is not easy to be damaged during work. working equipment A protective plate is also added to the boom cylinder. Not only can it effectively protect the boom cylinder from being hit by the bulldozer, At the same time, because it uses double-layer welding, It also prevents deformation of the protective plate. working equipment The hydraulic oil hose is sheath protected. The hard tubes are also neatly arranged. Upper body To better protect the engine, Reduce the risk of engine wear, An air pre-filter is installed in the air intake system, It can filter out more dust in the air. Upper body Hydraulic tank breathing valve is configured, Can block the intrusion of external dust, Thereby effectively protecting the cleaning of the hydraulic oil. Lower body Equipped with a large track guard. It can prevent the crawler from falling off during construction. At the same time, it can reduce the stone on the construction site to enter the link section. Thereby extending the service life of the chain link. Lower body Double support carrier sprocket configuration, Improve the durability of the carrier roller. (This article is from Komatsu) Electrodeionization EDI Water Systems Electrodeionization Edi Water Systems,Water Purification Machine,Ro Edi Water Treatment System,Edi Purified Water Machine Foshan Hongjun Water Treatment Equipment Co. Ltd , https://www.fswaterindustry.com
