Introduction of mini pleat filter machine:
This machine is mainly used for making HEPA Air Filters.
Advantages of mini pleat filter machine:
1)PLC Controller to adjust the pleating height easily.
2)Higher Pleating Speed.
3)Advanced Hot Melt Glue Dispensing Machine.
Main Functions of mini pleat filter machine:
1)Pleating for Glass Fiber & PP Filter Media.
2)Each Gluing Nozzles can be adjusted easily.
3)Automatic Filter Media holder with braking device.
Filter Pleaer Machine,Rotary Pleater,Rotary Pleater,Mini Pleat Filter Machine ChangZhou FENGJU Machinery Equipment CO., LTD , https://www.nbfengjumachinery.com
Nowadays, China is stepping up efforts to build an energy-saving and environment-friendly society. LED lighting has the advantages of long life, low power consumption and controllability. In 2013 and in the future, under the strong promotion of many policies in China, it is expected that the domestic LED market will continue to expand.
In 2012, the output value of LED packaging used in the lighting market was about $2.66 billion, which was 23.5 times higher than that in 2011. Among them, LED packaging is the most widely used for architectural landscape lighting or indoor lighting such as projection lamps and light bulbs. However, in the case of falling LED packaging prices, the demand for lighting markets in various countries has gradually been gradually introduced due to the introduction and price incentives.
Today, China has a huge lighting market scale and a strong lighting industry base, which has created a huge market development prospect for the development of China's LED lighting industry. With the continuous maturity of semiconductor lighting technology, the improvement of LED lighting performance and the reduction of cost, the prospect of China's LED lighting market will gradually emerge.
The advantages of LED lamps have gradually become the mainstream of lighting. Currently, the price of LED lighting lamps is much higher than that of traditional lighting fixtures, up to 40 times and the lowest is more than 2 times. According to the manufacturing process and component price of LED lighting fixtures, the price of LED lamps will always be higher than that of traditional lamps, but the price difference will be further reduced. Under the current domestic lighting lighting conditions and power price levels, the electricity and maintenance costs of LED lamps are lower than the equivalent lamps.
Based on the cost analysis of the life cycle of LED lamps, compared with traditional lamps with the same performance, LED lighting lamps have the full cycle cost of LED bulbs, LED spotlights and LED downlights, which are significantly lower than traditional lighting. Obvious competitive advantage. The life cycle cost of LED straight tube lamps is basically the same as that of traditional lighting. It is expected that in 2012, there will be obvious cost advantages and the promotion of alternative use. Among the outdoor lighting fixtures, LED lamps and tunnel lights are used to replace the 250W high-pressure sodium lamps. The cost of LED street lamps and tunnel lamps is lower than that of traditional lighting. The cost gap is about 30. The competitive advantages of LED street lamps and tunnels have already appeared. According to the trend of decreasing LED lamps and increasing performance, it is expected that the total cost of the life cycle of most LED lamps will be significantly lower than that of traditional lamps before 2013, becoming the mainstream lighting source.
National Industrial Planning Helps LED Lighting Market Growth On July 3, 2012, the Ministry of Science and Technology issued the “12th Five-Year Special Plan for Semiconductor Lighting Technology Developmentâ€. According to the goals set by the plan, by 2015, the scale of China's LED industry will reach 500 billion yuan. In 2012, the output value of China's LED industry was only 190.2 billion yuan, and there is still a big gap with 500 billion yuan. At present, LED lighting has become the largest application area of ​​LED. In the future, the growth of LED industry will drive the growth of LED indoor lighting.
The National Development and Reform Commission and other six ministries and commissions jointly compiled the "Semiconductor Lighting Energy Conservation Industry Plan." According to the goal set by the plan, by 2015, all incandescent lamps for general lighting above 60W will be eliminated, and the market share will drop below 10; the market share of traditional high-efficiency lighting products such as energy-saving lamps will be stable at around 70; LED functional lighting products The market share is over 20. The output value of LED lighting energy-saving industry has increased by about 30 per year, reaching 450 billion yuan in 2015 (including 180 billion yuan for LED lighting applications).
As LED lamps are gradually known to the public and their awareness continues to increase, the concept of energy-saving and environmentally-friendly lamps is rapidly gaining popularity, bringing a very good boost to the development of new light sources, and new light sources like LEP plasma sources. Will be easier for consumers to accept. Because LEP light source is used in the unparalleled advantages of high-power lamps such as LEP street lamps, once it is well known by consumers, it is bound to quickly occupy the market of high-power lamps, which means that the development opportunity of LEP high-power lamps has arrived. The LEP lighting industry will also follow the LED development period.